Geo Metro How do you put a new rotor back on without the drive shaft moving. 1990 Geo you should be able to push it in, tighten the small bolts by hand, and tighten the large nut by hand. Then put the
...geo metro. stuck at ball joint. remove ball stud bolts .then remove suspension arm bracket nut .remove suspension arm bracket bolts. remove rear bracket and suspension arm. torque ball stud nut 44 ft ...
...Geo Metro 1 liter engine? If you are going to do a timing belt job you should get a book. Along with timing you will need to torque specs. Most parts stores sell manuals for $20. If you dont want to ...
...a 1993 geo metro with a 1.0 L I am looking for the torque specs. for the rod and main bearings Rod bearing end caps 33-37 N-m ( 24-26 ft.lbs ) Crankshaft bearing end caps 50-57 N-m ( 36-41 ft. lbs
headbolts torque setting for 97 geo metro 3cyl 1L engine. thanks ted 5 1 3 7 6 4 2 8 cover bolts with engine oil and torque in stages to 54 ft. lbs. following sequence listed above.
head bolt torque specs for a 1996 geo metro 54 ft lbs
geo metro i need to see a diagram of the head sequence 1995 Geo Metro 1.3L TBI SOHC 4cyl The Head Bolt Torque 54 Foot pounds (Final torque)Torque sequence ------------ ' 8 4 2 5 9 ' ' 10 6 1 3 7 ' ---
1997 geo metro spindle nut what is the torque spec for front spindle nut on a 1997 metro http://www.fixya.com/cars/t21879275-1997_geo_metro_spindle_nut \Here is your answer.
...geo metro lx 1.3 liter which bolt>? there are hundreds. the FSM covers all this. so does alldata.com log in and read it. or look here. http://geometroforum.com/site/ ...
now adds torque, next will have the full FSM book in print here. https://www.google.com/webhp?gws_rd=ssl#q=metro+head+torque++3cyl+site:fixya.com timing answered 2 times now, your 2 others anon posts
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions