Questions & Answers for: front wheel drive vibration

Question about 2002 F350 Super Duty DRW Reg. Cab

1 Answer

front wheel axle. Lifted four tires off the ground and it makes a jerking vibration only in four wheel drive and i turn the steering wheel all the way to the right or left. Check the U-joints and axle

Ad

Question about 2002 Venture Passanger

1 Answer

...front wheel bearing July 08 and the right front wheel bearing April 09. I can feel the vibration in the steering wheel and on the floor of the vehicle. It can barely be heard until we are driving ...

Ad

...in all honesty havent a clue without a drive ,sorry Sounds like left side front axle when vibrating on right turns. To check jack up left side and grasp wheel and check for excessive movement or ...

Question about 2002 Sedona

1 Answer

...by fan belts. if no vibration and is front wheel drive, check joints on both drive shafts, if rear wheel drive check front and rear tail shaft u / joints, check wheel balance or out of round tyre

Question about 2002 Sedona

1 Answer

...front wheel drive the "C.V. Joints". The Constant Velosity Joints connect the front wheels to the drive shafts (R & L). Call around to front end alignment shops for quote about $175 to $225 +$130 ...

Question about 2002 Sedona

1 Answer

...front wheels are badly out of balance. This can occur if you regularly drive on unsealed roads, or the wheels have hit the curbside etc. Have your local tire fitter balance your wheels for you - this ...

...front wheel and vibration gets louder the faster you drive You have a defective wheel bearing most likely, the noise sounds correct for that problem. have a shop drive it before you replace anything ...

thoughts? you've got a bad axle shaft in the front and possibly a bad bearing in the hub. 4/wheel drive makes the front axle actually work. Theys no real pressure on these shafts when in 2/wheel drive

Question about 2001 Grand Marquis

1 Answer

...faulty "U" joints, worn slip joint or failed rear engine mount If front wheel drive it may be cv joints or bent drive shafts,wheel bearings or brake callipers not moving freely on the mounting

Question about 2000 Explorer

2 Answers

...bar bushings, cv joints You need the suspension checked on this. Many things can do this. When in 4 wheel drive you are putting pressure on the front suspension parts, This is why it doesn't

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...