Questions & Answers for: forward reverse linkage

...forward to reverse at a complete stop at an idle when I shifted back into forward it stayed in reverse. the linkage moves into the trans. so I do'nt think it is the linkage PS I did not find a utv ...

...forward and to reverse the linkage is most likely freezing up or has snow or ice build up causing it not to shift, My thought is your shoving it hard enough that it finally engages when you get the ...

...reverse. Forward and neutral ok. Have a 1996 Johnson 40 horsepower outboard. The reverse skips a little. Then I took it in to get the impeller replaced and now I have no reverse. Sounds like it is ...

forward and reverse gears will not engage (engine running ok) 2002 Hi it sounds like the main linkage is bent under the car, being as 1st would be forward and reverse back it is most likely the same ...

...It will not drive forwards. Is this a transmission issue or shift linkage? mine was operating in forward not reverse it was the linkage adjustment under the pedal one clip and turned the

...moves slow in forward evenb slower in reverse this hydrostat drive tractor is designed to max at 5.5 mph forward, 2.5 in reverse, check linkage at pedal if you dont think your achieving those ...

...changed the gear linkage and can't get car into reverse, the gear lever moves into reverse but the car drives forward. any ideas? look at the old linkage and see where the adjustments are

reverse, forward works fine and no gear grind when linkage is moved to reverse just prop spins free please point me in the right direction to trouble shoot this. Linkage is ajust correctly as far as I

...reverse but will not go forward, even when I push on the gas peddle. This happened after I did a U-turn and it sound like I hit something that might have locked up the area to where I can drive ...

...move forward told to check reverse linkage to make sure not stuck, where is it located. not sure if this link will help you out but have a look... sewing backwards only reverse linkage Google ...