Questions & Answers for: fellowes ps60c 2

...ps60c-2 I have a fellows ps60c-2 shredder and after I removed the seven screws I could not get the powerhead apart. I need to know what is holding it together yet. It also is shredding on the left ...

need replacement gear for fellowes ps60c-2 the only place I know is to contact fellowes or to see who is the real manufacturer of that model and order it direct through them. Thank You, mikey

Fellowes PS60C-2 shredder has stripped the teeth off of one of the nylon cogs driving the top (closest to the switch) toothed cylinder, all other parts are working perfectly (motor, circuit board, etc

...Fellowes PS60C-2 I had a jam and the main large plastic drive gear for the cutters now has five broken teeth. Can't seem to find a replacement. Could use some help! 200$ shredder or a 6$ replacment ...

Fellowes PS60C-2 shredder doesn't shred The motor in my Fellowes PS60C-2 shredder only works in reverse and the little red light shows for a micro-second after the button is held down although the ...

Fellowes PS60C-2 jams within 1 or 2 seconds. It is out of warranty. The Fellowes tech suggested that if I opened the unit, I might find gears stripped and replacements could be obtained. I have ...

the gears have broken off on the schredder the gears have broken off on the shredder i need to know how much the to gears cost for the two cutters. The plactic gears are ok. call Fellows at ...

PS60C-2 Shredder: Fellowes P50CM paper shreader motor runs but cutte... Fellowes P50CM paper shreader motor runs but cutters don't. One of the drive gears has stripped its teeth, usually caused by ...

...PS60C-2 Broken gear wheel:- 1.5" dia X 9/16" wide - 13teeth with spigot 7/8" dia X 5/16" long with 5/8" Hex. through bore. Are they available and how much do they cost? Buy a ...

...ps60c-2 fellows shredder? how do you take the cover off the shredder after you have removed the 7 screws and the power button? The one set of teeth do not rotate so we need to get into the motor ...