Questions & Answers for: find other end coax

...at the same time, unlike coax. If you are attempting to patch RF, your cable must be coax at both ends. Hope that

...end. The back of the converter box has 2 coax connectors. What type of interface connector do I use to attach the coax cable to the screws on the tv? What type of connector do I use to hook the ...

found the answer. If it goes away, either get a new piece of coax or tighten the connection at both ends

...end of the coax cable. Go to Radio Shack, Home Depot, etc. and pick up a new twist-on coax connector, or a crimp on version if you have a crimping tool. Twist the new coax connector on good and tight ...

...coax input to the radio. Often the fault is that the soldered end is faulty at either the radio or the aerial end. If you have a voltmeter, check for shorts by putting each cable to the inner and ...

...coax end of the plug into your "coax out" connection on the back of the project. The other end will depend on your speakers. If your speakers take an RCA connection (white and yellow cables) then you ...

...source) works fine as I have tested it on another TV. Any suggestions? You will need solid coax ends and connects. You need very high grade coax union and snap and seal coax BNC connectors for ...

...end of the coax and the black lead to the other plug at the center. You should get a reading or a tone depending on the style of meter you have. If you dont the coax is broken somewhere and needs ...

...coax outer shield from end to end. ? If greater than specified value, replace the cellular antenna coax cable. Test for infinite resistance between the antenna coax center terminal and the outer ...

...end and coax on other end my coax connection broke on my tv looking for cable to use and connect to antenna Analog is a type of signal...not a cable end. Since you're going to be soldering anyway, ...