Questions & Answers for: drc8335 power supply problems

...so that I may changed them out? Thanks for you help in advance. Ya rca needs to recall all rca drc8335[tape decks] I unpluged power to deck [jumper p/s to deck] use a other vhs deck pluged in avi ...

DRC8335 VCR PCB is a 51ohm 1/4 watt 5% tolerence resistor, color coded green-brown-black-gold. As to zener diode DU83, I haven't been able to determine it's value yet but am working on the problem. Be

DRC8335 power supply. C226 was the problem, went to Radio Shack and found the 470uf 35V replacement. It came up and worked like a charm after soldering it in. (See the picture of the cap on the board)

DRC8335 power supply. C226 was the problem, went to Radio Shack and found the 470uf 35V replacement. It came up and worked like a charm after soldering it in. (See the picture of the cap on the board)

power supply. C226 is a cheap 470uF capacitor that you might as well replace as soon as you get this unit. It is probably going to start bulging and will result in an unresponsive machine. Cheap part

...Power supply defect, replaced leaked capacitors c103 on high voltage circuit and c204 on low voltage circuit and problem still persists On the power supply board I replaced CAP C226 as per another ...

...power supply . There is also some brown spots here and there on the board. I'm thinking its just some glue. Looks like maple sysrup. If you know some that can solder new caps on. Have them check ...

Can you tell me what could be Wrong? Thank YOU James Problem could be within the power supply i am assuming it does it regardless of playing tape or normal tv may need to go in for a service and check

...DRC8335 remote not working and dvd/vhs only scrolls hello how to fix and what is code for remote That is the same problem I had with mine. The problem is not with the remote, but one (or two) of the ...

...drc8335 in I get hello but will not turn on That is the same problem I had with mine. The problem is one (or two) of the capacitors on the power supply board. If you can solder you can replace them ...