Questions & Answers for: designer 1 bobbin tight

...bobbin area for dust etc and changed needle - I haven't changed anythig - any idea what else to try? Our Bernette E90 timing was off due to a jam (design flaw I think)...Instructions on how we fixed ...

...designer 1 that won't release the bobbin. I have a designer 1 that I purchased in 2003. I've had to have the bobbin winder replaced 3 times. Now when I wind a bobbin it won't release the bobbin and I ...

...Designer 1 is too tight The bobbin thread on my Viking Designer 1 remains straight no matter what number I set the tension at on the display (2.8, 3.0, 3.2 etc.) The upper thread is looped very ...

designer 1 moves the embroider attachment instead of the needle also when embroidering the message "broken thread " appears every few stitches and the thread is not broken It's okay - it's supposed to

...Designer SE If you are adjusting the upper tension on your machine and yet there is no difference to the sewing, it seems to me that maybe your upper thread is not in the tension disks correctly. ...

...1.top tension to tight 2.thread to thick or to fine for needle 3.needle not inserted correctly 4.thread caught on something-spool pin, tension area 5.needle damaged 6.needle thread is not threaded ...

...1/4" hanging outside before replacing the bobbin cover. Here is my method for winding bobbins.Important: reduce machine speed by at least two clicks. Put bobbin on spindle and carefully push it down ...

...Designer 1 pressor foot does not rise when I stop sewing, the cutter doesn't work and when I try to wind the bobbin, it winds too tightly. I can't get the bobbin off. PERHAPS A TRIP TO YOUR LOCAL ...

Designer 1 scissors doesn't work and the pressor foot doesn't lift automatically when I stop sewing and when I tried to wind the bobbin, it was so tight that I couldn't get the bobbin off the spindle.

...bobbin case tension on red 1 and leave it there. These are seriously beautiful machines, but often a second owner is not familar or doesnt have the manual and then has a jam up or two. This leaves ...