Questions & Answers for: cleaning bobbin case janome 9000

Question about Memory Craft 9000 Computerized Sewing Machine

1 Answer

...bobbin case area, especially the recess track where the bobbin case spins. If there are any needle strikes on your bobbin case which have spoiled the smooth surface required for efficient thread ...

Ad

Question about Memory Craft 9000 Computerized Sewing Machine

2 Answers

bobbin case, if I don;t my bobbin jamms up badly, I clean the bobbin case every week and am so careful with it. I just find it very unusual that with this machine I go through so many bobbin casea and

Ad

Question about Memory Craft 9000 Computerized Sewing Machine

1 Answer

...bobbin case as a first measure, and give this area a good clean anyway as normal housekeeping.....this will probably make little difference, but may let you finish any urgent job over the weekend. ...

Question about Memory Craft 9000 Computerized Sewing Machine

1 Answer

cleaning which did remedy the fault. So my current theory is clean under the bobbin holder more regularly and use only "pucker' Janome bobbins. Thanks very for your help. Ohhhhhhh yes, Clean under and

Question about Memory Craft 9000 Computerized Sewing Machine

1 Answer

...bobbin case and clean the lint and stuff out from under it. There is a wick in the center of the hook( the part the bobbin case sits on). Do not mistake this for lint and pull it out. Put a few drops ...

Question about Memory Craft 9000 Computerized Sewing Machine

1 Answer

...bobbin case on new Janome 4020 I have just bought a Janome 4020. I tried the different stitches, when I used the overcast foodt it started making loops on the top-side of the material and it started ...

Question about Memory Craft 9000 Computerized Sewing Machine

1 Answer

...bobbin case. Before you do anything else, I'd remove the bobbin case, clean it and the area around it thoroughly (and check it for scratches or dings -- perhaps a needle broke recently?) and then ...

Question about Memory Craft 9000 Computerized Sewing Machine

1 Answer

...it tired? The bobbin case is locked in place, because of tread or lint. The "hook" will not move. Take the bobbin unit apart and clean and oil the hook (yes, oil, just a Q-tip amount). Keep on ...

Question about Memory Craft 9000 Computerized Sewing Machine

1 Answer

bobbin keeps balling up. I have taken everything apart and cleaned it out. I have changed the bobbin and needle. What else can I do I would suggest a new bobbin casing, yours maybe damaged. Also, you ...

Question about Memory Craft 9000 Computerized Sewing Machine

1 Answer

...put it back together it will stop for a few minutes but start banging shortly after I start sewing again what is wrong how can I fix it probably damaged bobbin case...needle strikes are a common ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...