Questions & Answers for: change fuse power mirrors ford

Question about 2003 Escape

1 Answer

...change battery i recently installed a new battery in my 03 escape, i accidentally touch the connectors to the wrong battery posts, after correct installation ive noticed that the radio , dome lights ...

Ad

Question about 2003 Escape

2 Answers

...Ford dealer said it was. Thanks Theft light came on when driving and they said this part had to be replaced? pcm is under the console under the dash not the one between the seats. It's also called a ...

Ad

...2003 Ford Escape. The mirror is not heated. How do I do this? you have to remove the door panel normally wnd maybe a small cover over the inside of the mirror you will see 3 or 4 small bolts undo ...

Question about 2006 Escape

1 Answer

...2003 Ford Escape the rear view mirror fell off and I have the glue. but I'mm having a hrad time getting the pin ( for lack of a better word ) off the mirror to stick to the windshield. Any tricks to ...

power locks dont work. ive checked all fuses and the all look good , what should i look at next, dont want to take to mech, dome light, door locks, and radio do not work in 2003 escape, i have found a

How do you change the passenger side power mirror? Typically the mirror is fastened to the door, so you'll have to remove the door interior panel to R/R it.

...mirrors Visual Inspection Chart Mechanical Electrical Exterior rear view mirror(s) Interior rear view mirror Central junction box (CJB) Fuse(s): 8 (10A) 16 (10A) Circuitry Exterior rear view mirror ...

...fuse for the power outlet is located under the hood in the fuse/relay box, heres a few diagrams to help you, there are two fuses one for front outlet and the rear outlet has its on fuse if your truck ...

Question about 2003 Escape

1 Answer

...Ford Escape (2003 model) is stuck in park and the car itself will not start. It doesn't even attempt to turnover. All components otherwise are working, including the lights, radio, and mirror. I have ...

...vanity mirror lamps. The SJB controls the demand lamps by providing power through circuit 1005 (VT/OG). Both subsystems use the same power supply circuit through the SJB fuse 2 (25A) and fuse 3

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...