Questions & Answers for: car radio standby turn

...on my radio. It goes from TUNER to STANDBY every time I press the button. Help! Your going to need to pull off the battery cable for about 2 to 5 minutes and see if this will reset the radio. Good ...

...SRC button until the unit says Standby, then press menu. If you dont find it in there, try the same way but press and HOLD Menu. If that doesnt work give me a call when your near your radio. ...

...radio and i can't turn off demo mode You should only need to either turn the unit off or put it in standby(I believe it's standby) and then hold the menu button. You should have a new menu of options ...

...standby?? thanks Hello Tim-----your radio has menu options that can be changed- one of these turns on your aux port. to access this GO TO www.kenwoodusa.com on the top of the page click on support ...

...mode and I cannot find it. Can you tell me how to get into standby mode before I press the DISP button? The standby mode is just having the radio turned off with the car or key turned on. That's

RADIO WON'T SHUT OFF WHEN CAR IS TURNED OFF AND KEY IS OUT OF THE IGNITION. Is your car named Christine? Either the radio is wired wrong - (is it possible it is wired directly to power?) or your ...

...the dimmer in the back of the radio(model KDC-MP242) you need to access the menu on the radio and turn it on. The menu can be accessed by putting the radio on standby and holding down the menu

...car radio and can not set the correct time on the clock settings Instructions for setting the clock, in the supplied booklet just do not work. section 02 page 17, in the booklet, advise, to press ...

...tell you which button you need to push to turn it off.   If I remember correctly, it should be the display (dsp) button.   It may also work while the radio is in standby

radio even when it's turned off Lots of radios do this while on standby connected to the mains. I suppose it is useful for finding it in the dark. Inside that rugged case will be fairly ordinary radio