Questions & Answers for: button door lock unlock front

Question about 909 909-15 Satin Nickel Smart Code SmartCode Signature Series Touch

1 Answer

...button on the outside of the door and slide the batteries back in wait for a couple seconds..... Let go, push the button on the inside to program your lock code .....enter your lock code and then hit ...

Ad

Question about Kwikset 907 Smart Code Polish Brass Smartkey

1 Answer

...door with the code. we have discovered that if you push the center lock button if will unlock the lock. The code is not required to enter. What do I do to fix this problem? With the door open so u ...

Ad

Question about 909 909-15 Satin Nickel Smart Code SmartCode Signature Series Touch

1 Answer

...door and extend the lock bolt. Remove the battery. Press the reset button three times and wait 20 seconds. Push and hold the lock button, while inserting the batteries. Hold the lock button until the ...

Question about Powerbolt/Electronic Deadbolt- Polished Brass

2 Answers

...door locks when you put in the code and unlocks when you push the lock button. Your problem is likely that the lock is programmed for the "wrong-hand"-left door versus right door installation. Here's ...

Question about Powerbolt/Electronic Deadbolt- Polished Brass

1 Answer

...Door handing: I have installed your Powerbolt, but when I push the Lock Button, it unlocks? What should I do? First remove the cover on the inside of the Powerbolt unit. On the right hand side under ...

Question about 907 907-15 Satin Nickel Powerbolt Keypad Electronic Deadbolt

1 Answer

...button, you may need to reprogram the door's "handedness", which gives the lockset the ability to be used on doors that have their hinges on either the right or left side of the door (right-hand ...

Question about 909 909-L03 Lifetime Polished Brass Smart Code SmartCode Signature

1 Answer

lock the device from outside or get the code to unlock the door. Check to be sure the keypad is still connected to the inside assembly. There is only a one year warranty on the electronics and Kwikset

...Button, it unlocks? What should I do?"First remove the cover on the inside of the Powerbolt unit. On the right hand side under the batteries, you will notice that is says “Door Direction Jumper”. If ...

Question about ELECTRONIC DEADBOLT KEYLESS ENTRY DOOR LOCK

1 Answer

...door opens) under the cover. Press the Program button once and then enter the 4-8 digit code. Press the Lock button to set the code. If you hear a long beep, the code was accepted; otherwise try to ...

kwikset powerbolt2 tried entering a new code and now it does not beep and harder for the door to unlock and lock manually. Replaced the batteries and no luck recheck and test batteries

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Locks & Locksmithing Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Locks & Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...