...fell off. Make sure there is a little metal wire piece on .the bobbin winder, if not that is your problem i had the same problem with my 9110 euro pro it was in the part that held the bobbin in the ...
Question about XR-65t Mechanical Sewing Machine
fell off. The needle clamp won't stay on nor will it hold the needle in place. just adjust to needle in fix to strait in needle clamp hole it operate to needle strait to hole so needle do nt break but
Question about XR-65t Mechanical Sewing Machine
...fell out while trying to fix the bobbin-winding and we need to attach it again. In order to do so we need to open up the sewing machine all the way. How do I do this? Disassemble your home sewing ...
Question about LS-2125 Mechanical Sewing Machine
bobbin assembly screw came loose, and the plastic part fell off. I removed the plastic case, and re-attached the fallen part. The alignment between the two gears is off, and I need to know the correct
...bobbin area a metal part fell out. I don't know the name of it, and the manual doesn't list it. I need help installing it back in the machine correctly. You didn't state what model you have, and that ...
Question about LS-2125 Mechanical Sewing Machine
but bobbin winder fell to bits and I do not know how to put it back Together The bobbin winder fell to bits when I removed it to put a new belt on there are three parts Can you take a pic. And send it
Question about LS-2125 Mechanical Sewing Machine
...a part with the number 4 4130073 fell out. How do I put it back in the machine correctly? The part fell from the bobbin case, it would probably be better to just purchase a replacement bobbin
Question about LS-2125 Mechanical Sewing Machine
...parts are meant to be removable for cleaning and oiling. How to pull apart and reassemble the bobbin case area on front loading... How to Clean and Maintain your Sewing Machine at Home Front Loading ...
Question about LS-2125 Mechanical Sewing Machine
...Inside, I found two circular pieces that hold the bobbin in had fallen out! Should I try to pop them back in? personally i would take to a local repair shop. there should never be parts falling ...
Question about LS-2125 Mechanical Sewing Machine
...bobbin and a "C" shaped loop fell out. i do not know where it is from nor how to reinsert it - any help would be appreciated - thank you. Bernie That sounds like the Bobbin Hook, the part that picks ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions