Questions & Answers for: bobbin case not moving

bobbin case is moving out of place everytime I start to sew the bobbin case gets moved out of place and E6 shows up on the display. This doesnt happen when there is no thread in it or when I manually ...

bobbin case and not a drop in bobbin. Let me know if you have a drop in bobbin: Setting bobbin case tension: Put wound bobbin in bobbin case. Thread it in case. Hold the thread and carefully let go of

...bobbin case tension: Put wound bobbin in bobbin case. Thread it in case. Hold the thread and carefully let go of the case only holding bobbin thread. The case should NOT move. Quickly let your hand ...

bobbin case that the bobbin sites in is not supposed to move at all, on the right hand side of the bobbin case you will see two screws, if you slacken them off you can push the guide bar closer to the

bobbin case. i also obtained a replacement bobbin case from brother, it worked for a while, but now i'm back at the same problem. any an all solutions would be greatly appreciated.. i have been sewing

bobbin case is not moving. The part that holds the bobbin moves, but the bobbin case doesn't The bobbin case is not supposed to move. It should only have a little bit of wiggle room so there is enough

...bobbin case, the bobbin should move/circle counter clockwise in the bobbin case. But also sometimes the bobbin may not be the perfect size for the bobbin case, take a good look! Or if your bobbin ...

Bobbin case inserting wrong I am trying to insert the bobbin case into the bobbin housing. The housing (metal hardware that the bobbin case sits in) was not moving that I recall when I started sewing ...

Bobbin case on my ce10131 continental sewing machine will not move. Bobbin case on my ce10131 continental sewing machine will not move when I turn the hand wheel. Manual does not cover this. I don't ...

...bobbin case . It comes only half way out 880 Bernina If your bobbin and bobbin case are stuck on your 880 Bernina sewing machine, there could be several potential causes for this issue. Here are some ...