Questions & Answers for: bissell powersteamer proheat water leak

...water comes out of hand tools what would be the problem?? Pump may be bad, also the cap for the flow indictor may be leaking air. Does the automix vale knob turn easily? If it turns real hard, then ...

...tank. When I disconnected the input hose, water would pump through the hose, but nothing would flow through the tank. I was able to clean out the tip, and everything worked fine. If you can blow air ...

Bissell 1698 Powersteamer no spray Steamer is not putting out any spray. I have checked the belts - they are fine. I have cleaned the fileters. The water tank seems to fit ok - although it doesn't ...

...Bissell powersteamer powerbrush. I need the directions for filling the u tank etc. Release the handle and lay the machine handle back to access the Tank. 2. Remove the Tank from the base of the ...

Bissell Pro Heat Powersteamer- Filed it up, turned it on, asusual, but no water flowing from machine at any setting. Vacuum part works. The water sprayers on your Bissell are probably clogged. I had ...

...Bissell proheat Hello I hava a Bissell pro heat 12 amp -it is not shooting out the soap?!!!! Any suggestions never did this before??!!! :) unfortunately, i stored this with solution in the soap ...

...Bissell ProHeat Powersteamer I just replaced mine last night. 1) take off the top belt cover. 2) take the water and cleaning solution tanks out then lay the unit on the side so the bottom of the ...

...powersteamer clearview will not spray water Chaged broken belt worked through one bucket of water changed water now will not spray water belts are still intack. tried priming, cant find anything ...