...Bissell Spotbot and when I set it up, it doesn't spray from either the auto mode or the manual mode. The troubleshooting only offers to make sure the tank is in securely by gently pushing and seeing ...
lift off won't **** up. The top half shut off during vacuuming. It will not **** anything up but the rollers are still spinning. There is no burning smell. I did find a clog in the hose but no where ...
Question about 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum
...Bissell Lift-Off Revolution Pet Vacuum Cleaner Bissell Lift-Off Revolution Pet Vacuum Cleaner just shut off while I was using it. I tried a different plug. Is there a reset button or do you think the ...
Question about 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
lift the driven side of the brush straight out. The belt is probably broken and this was caused by a build up of hair around the ends of the brush. If the belt is not broken just clear all debris from
Question about 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum
Bissell 37604 Lift off bagless vacuum. The power comes on but the brush doesn't. It has been cleaned thourghly, and the belt is in good condition. It there a reset button somewhere on the vacuum? What
Question about Lift-Off(R) Revolution(R) Turbo Upright Vacuum
...Bissell lift-off revolution. The power won't turn on at all. Tried different outlets. It doesn't work whether the lift-off canister is out of the frame or in the frame. The manual refers to a reset ...
...vacuum at this URL: http://middleeasten.bissell.com/images/UserGuides/3750.pdf This shows the belt to slide on the motor drive pulley and also on the brush. If the brush is bound up on the two ends ...
Question about LiftOff Revolution Pet Vac 37602 Vacuum
...Bissell. Remove the Lift-Off portion of your vacuum cleaner. Down at the bottom, where the Lift-Off portion was sitting, you should see a small electrical plug part. What usually happens is this plug ...
Question about 2X Proheat 9200 rug cleaner
...Lift the rotor out and under it is the filter. Clean and reinstall in the reverse order. Now under the Water Tank Cap is another filter that looks like a screen. Remove it and clean and replace. Now ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions