...Bernina 163 Virtuosa. I have fought with the buttonholer from day one. It suddenly has decided to make the left (first) side 1/8" longer at the beginning than the right (second) side. I come out with ...
...Bernina Virtuosa 150 ( buttonhole foot with slide 3A ) my old sewing is Bernina 1998'. Will you help to find a buttonhole foot with slide 3A, please.I need to know how much price for this ? Thank ...
instructions to time a bernina 217 sewing machine my problem was the timing on my Bernina 217 but fixya wouldn't recognize that machine so I picked a Bernina anything. I fixed it thru perseverance... ...
...my Bernina Virtuosa 160 automatic buttonholer. Check the feeddog teeth height. At their highest point, the FRONT teeth height should be 0.05mm higher than the back teeth. Good luck. Esther. ...
...Bernina 160 can no longer be adjusted to produce a good stitch, and it would have to be "sent back." Where? It weighs a ton. Do I scrap it? Get a new technician, preferably a Bernina tech. A proper ...
Question about Virtuosa 160
...Bernina Virtuosa 160 bunches up the thread on the bottom side of the fabric, any thoughts as to why? My problem has been solved. We removed the plate, brushed it and replaced the plate. it works fine ...
Question about Virtuosa 160
IF THE COTTON GATHERS AT THE BOBBIN SIDE OF FABRIC WHEN SEWING WHAT ARE THE POSSIABLE REASONS ONTHE VISUAL SIDE OF FABRIC THE STICHERS ARE CLEAN AND ORDERLY This a tension problem, the upper thread is
Question about Virtuosa 160
Bernina 160 stops for a brief second while I'm sewing and starts up again. Does this sound familiar to anyone? My Bernina 160 stops for a brief second while I'm sewing and starts up again.
Question about Virtuosa 160
...Virtuosa 160 machine. When I turn it on, it may or may not start. If it starts and I try to sew, it shuts off after a few seconds. What can the problem be? Most likely a computer component is
Bernina Virtuosa 160 needle stop position problem. I have a Bernina Virtousa 160. It has recently started having a problem with the needle stop position. Sometimes when set tu stop in the up position,
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions