throttle screw on the RIGHT carb one half turn inward. Restart and rev the engine. Next, remove the LEFT spark plug wire. Adjust the idle speed on the right carb to the point where the engine just can
throttle cable adjustment .Had a 2003 come in and the complaint was the same.Adjusted the handlebar cable adjustment and what a difference.Also check the vaccum line onthe right side under the edge of
...adjust the throttle cable idle stop screw to 950-1050 RPM. 9. This procedure works great on 99% of all engines, for the 1% that demand a more robust throttle response on aftermarket monster fuel ...
...cable harness at "BOTH" ends. 4. Failed main circuit breaker or ignition switch, check for loose connections and continuity. 5. Failed system and or ignition relay, check for continuity. 6. Failed ...
Question about 2004 VTX 1300
...cable harness at "BOTH" ends. 4. Failed main circuit breaker or ignition switch, check for loose connections and continuity. 5. Failed system and or ignition relay, check for continuity. 6. Failed ...
Question about 2005 VTX 1300 R
...throttle cable 12. Clogged or faulty fuel pump filter or injectors. 13. Faulty pressure regulator. 14. Improper valve adjustment. 15. Slipping clutch. 16. Improper timing. 17. Low compression. For ...
Question about 2005 VTX 1300 R
...cable harness at "BOTH" ends. 4. A failed main circuit breaker or ignition switch, check for loose connections and continuity. 5. Failed system and or ignition relay, check for continuity. 6. Failed ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions