Questions & Answers for: adjust idle throttle body

...idle, so open brass screws another half turn till it idles)and check vacuum guages.... see how far out things are at this stage. -adjust throttle stop screw(s) so that each throttle body is set-up ...

Ad

Question about 2007 Altima 3.5 Sedan

1 Answer

idle adjustment. if it has high miles try spraying throttle cleaner into the throttle body. (spray it directly in throttle body not the mass air flow sensor on the air box) when its idling. worst case

Ad

...adjust idle on 2005 3.4 buick rendezvous? Idle is adjusted by the car's ECM and can not be adjusted manually. Its most common when there is idle issues, there is carbon build up in the throttle ...

Question about 1996 Cutlass Ciera

1 Answer

...dirty or faulty.  If after your disassemble your throttle body and clean the throttle body and sensors you still have the issue you can adjust your idle through the Idle Adjustment Screw.

...Adjust idle RPM for a 2003 honda accord. some people were talking about a screw on the throttle body. but I can't find that screw. How do you go with adjusting this and where to find it ? How to ...

...not have to adjust your idle. itusually means that there is a bad sensor if your idle has changed suddenly,**** what exactly is the car doing? ex.fluctuating rpms?, low constant idle?, high

Question about 2007 Corolla

2 Answers

...adjust the throttle body Cleaned throttle body now it's idling to high. How cN I get idle back down? The throttle bodies on most newer cars are not adjustable for its idle speed. If the Check Engine ...

Question about 2006 Five Hundred

2 Answers

...throttle body and Idle air control valve (iac) ... It's in fail safe mode or limp mode is another term used for this. Alot of times the throttle body is the culprit its a common issue with the 3.0 ...

...adjust the idle..Still trying to find out why car will not stay running There is no screw to adjust the idle , the PCM - engine computer controls the idle with the use of IAC valve , Idle air control ...

throttle idle actuator" (MTIA). This component is the throttle body assembly but with an internal motor that adjusts the throttle plate open or closed based on accelerator pedal position inputs to the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...