Questions & Answers for: 2004 dodge ram 2500 axle

...2004 dodge 2500 4x4 Our is a 44mm socket size........thought i would post it, since the above was stupid and didn't....can't find one in town. I needed the axle nut size for front drivers side on ...

what size is the axle nut on the 2004 dodge ram 2500 The size is between 1 1/8 in to 1 1/2 in.

...dodge ram 2500 4x4 with the v-10 and i just changed the hub bearing on the drivers side and now the axle seams really loose kinda like a ball joint but the ball joints are good any ideas on what it ...

...and the 2 caliper bracket bolts on a 2004 dodge 2500 4wd...do you have them? Caliper Bolts Torque ...... 24 ft. lbs Hub/Bearing Bolt ........... 122 ft. lbs Hub/Bearing Nut ............ 180 ft. ...

i need the touque specs for the outer front axle nut on a 2005 dodge ram 2500 4x4 HUB AND BEARING ASSEMBLY NUTS TORQUE TO 125 FT LBS THE HALF SHAFT AXLE TORQUE TO 185 FT LBS.

...Dodge Ram 2500 4/4 Cummins, Automatic. The pinion nut does not have a torque spec. as in how tight the nut is. The amount of torque is measured in bearing preload. You will need a "torque to rotate" ...

Torque spec for front hub extension on dodge 2004 3500 HD dually front hub nut ( axle shaft ) 185 ft lbs.

...2004 doge ram 1500 4x4 Here are the specs you're looking for: • Font axle to hub nut torque 185 ft-lbs • Front hub bearing bolts 60 ft-lbs • Caliper housing bolts 125 ft-lbs • Caliper guide bolts 26 ...

...2004 dodge 3500 dually I need the torque specs for the front wheel bearing assembly on a dodge dually The hub bearing retaining bolts are 150 ft. lbs the center axle nut primary torque 135 ft.lbs ...

...dodge ram 2500 turbo diesel Tighten the spindle nut to 149 ft-lbs to seat the bearing then . rotate the axle 5 to 10 times to seat the hub bearing, then tighten the spindle nut to a final torque of ...