Questions & Answers for: 1999 blazer 4 wheel drive

...blazer 1999 transmissioin shift problem My blazer wold not engage in one it engages in 2 as I want to move also 4 wheel drive does nto engage when I press the button. 1- STOP THE VEHICLE 2- MAKE SURE ...

1999 chev blazer 4x4 system my 4x4 blazer will not engage in 4 wheel in low or high.the switch still lights up but 4 wheel drive not working. I have a 1999 chevy blazer that stuck in 4 wheel drive. ...

...Blazer The 4 wheel drive wont engage now either. Is there a censor of some sort? common problem with these is corrosion at electrical connector in control box located on passenger side behind kick ...

...blazer and i cant get it to go back into 2 wheel it will go into 4 high and 4 low but i not 2 wheel the light will flash but it wont kick in why With the selector in 2WD, attempt to slowly move the ...

1999 Blazer 4X4 will not go into 4 wheel drive. The indicator lights function correctly. The transfer case is engaging, but the wheels do not drive. Also there is a significant amount of 'drag' on the

...blazer 4 wheel drive not working and lights on dash not working. Front drive shaft seems to be locked in no matter what but front end not engaged. Vehicle has auto 4 wheel drive option Its probably ...

...4 wheel drive to work / engage in the blazer i have here. I do not have an owner's manual to use as a reference. The trouble I am having with it: when i push any of the buttons to engage the 4 wheel ...

...4 wheel drive isnt workin, the lights are coming on but its not engaging Most likely its the actuator, this moves a small lever in the transfer case. When a 4 wheel drive is not used often enuff it ...

...I have had 2 blazers before with the same push button 4x4 control and never had any problems I have a 1999 blazer every thing is engaging and says it is in four high but the front wheels is not ...

...4 wheel drive button the transfer case engages but the front axle does not engage Pull the battery box out,there will be a plunger with a cable hooked to it,pull the cable and the front axle should ...