Questions & Answers for: 1996 royal star clutch fluid

...fluid out of the clutch master throught the slave cylinder and refilled it with new fluid. Bled the system really good and now it works just like new. If this does not help you may need to remove the ...

fluid. Bleeding the clutch or brakes following this procedure: 1. Top off the reservoir with brake fluid, leave lid off or temporarily replace it, if fluid can spill during bleeding. 2. Cyle the lever

...readily accessible. Remember to change both copper washers at the clutch hydraulic cable junction, reusing the old ones are sure to cause, at the very least, a slow hydraulic (DOT 4 brake fluid)

...clutch fluid return port was plugged. It's a small pinhole in the master cylinder that bleeds pressure back to the reservoir when the clutch lever is released. Otherwise pressure builds up in the ...

...1996 Royal Stars. Both of them appear to have a slipping clutch at higher rpm's in the higher gears. Neither one will creep if you start them in gear while holding the clutch, just top end issues. I ...

...1996 royal star i have replaced clutch and presure plate lines put kit in master clyinder put on new slave cylinder and have bleed and bleed it ! it works for about 14 or 15 times then it will slip ...

4 old fluid. (Brake fluid is also used in clutch and like on brakes gets old and has moisture in it. Replace and bleed with dot4 or dot5 fluid. I found it Easter to reverse bleed the clutch and brakes

...from an obvious line leak....main cause of fluid loss from clutch reservoir is the slave cylinder seals are weeping....should consider rebuilding or replacing the slave...about $70 for a new

...valve open on the slave and let gravity do the rest. once you have clear brake fluid coming out tighten the bleed valve and work the clutch several times then repat untill you clutch operates ...

leaking fluid from clutch slavecylinder 1996 Yamaha royal star sorry my fault I thought it was a car fault I was replying to.
very sorry about that.