Questions & Answers for: 1990 isuzu trooper 2 engine

...1990 izuzu trooper is running hot and releasing pressure under the electronic fuel injection system,but i cant find out where exactly it is coming from and it only releases the pressure when it idles ...

...Isuzu Trooper oil gauge won't budge and the oil pressure light will stay on after starting the engine. It takes time for these gauges to work. Can you please advise me on this. Thank you Acer, check ...

...Isuzu Trooper 3.2 SOHC. My oil gage is telling me I have no oil pressure. I want to check the oil pressure sensor but I need to know where on the engine block it is located. drivers side right above ...

...1990 Trooper need to put a new starter on my 1990 trooper. How long should it take? 2.6L or 2.8L ?? I have a 2.6L and it took me 2 hours. changing starter is time consuming.on v6 motor you have to ...

low oil presure 2.8 v6 GM is there an oil pressure relief valve on this engine and if so where is it? http://www.myisuzuparts.com/index.php

...1990 isuzu trooper was driven to town when it started to heat up and miss a lot. No power on acceleration. Shop took compression test. # 1 piston 150 # 2 50 # 3-0- # 4.-0- I had the auto shop replace ...

ISUZU TROOPER 3L injectors, what oil pressure do they require to make them work at cranking the oil pressure has to be approx 5 mPa before they start to work electrically also, oil pressure at rail ...

...1990 Trooper that is stalling, it's had regular tune ups and oil changes and when it's not stalling runs fantastic. There's a knocking sound coming from the engine and folks have ...

...engine so you get oil into all the galleries , connect an electric drill to the oil pump drive and spin for a good 3-4 minutes , connect a pressure gauge as well so you can see the pressure build ...

Isuzu Trooper. Where exactly is the sensor for oil pressure located on a Trooper? Where is the oil pressure sending unit located? ('86 4LZD1) Isuzu SUV Forum https://www.planetisuzoo.com > threads > ...