Okay i have corby 2 phone and if i put on the headphone, it automatically dials number, even if im not doing anything and when i checked the auto redial, it isn't activated as well, what should i do?

incorrect operation. 1. Remove screws and back cover. 2. Insert two 1.5V 'C' Alkaline batteries. (Check + and - are correct.). IMPORTANT: Rechargeable batteries must not be used. 3. Replace batteries each season. (max 12 months use) MAINTAINING THE WATERPROOF SEAL 1. Ensure that rubber seal is positioned correctly. 2. Replace back cover and screw down tightly. 3. Repeat each time back cover is removed. HOW TO PROGRAMME THE TIMER There are two watering operations - Automatic and Manual. AUTOMATIC OPERATION Automatic ON 1. Turn dial clockwise to AUTO START at actual desired start time (e.g. To start watering each day at 15H00 you must set your AC1 when the actual time of day is 15H00). The timer has now memorised the auto start time until it is reset and will operate every day at this time. Use of manual ON or OFF does not cancel memory. 2. Turn dial anti-clockwise to: a) Chosen duration for once-a-day operation, or b) Chosen programme for all other watering frequencies (see table). The timer will now automatically run the selected program repeatedly until a new option is selected. GB 2 Automatic OFF Turn dial to Manual ON or OFF. If you wish to return to Automatic watering re-select the desired watering programme. NOTE your auto start time remains memorised until a new one is selected. Changing start time Turn dial clockwise to AUTO START at new chosen start time. Changing watering programme Turn dial to new programme. Do not turn dial to AUTO START unless a new start time is desired. MANUAL OPERATION Manual ON Turn dial anti-clockwise to ON. Water will flow for 60 minutes maximum or until turned to OFF setting. Note: After 60 minutes water shuts off. Knob will still point to ON and needs to be manually set to OFF or to desired number of automatic watering minutes. Manual OFF Turn dial clockwise to OFF. Note: Operation is only audible when valve opens and closes. To check that timer is working, switch to manual ON or OFF to hear valve operate. CONNECTING THE TIMER TO THE TAP Use supplied adapters if required. Tighten to ensure no leaks

Backup All Your Data (pics, contacts,music etc) before doing it.
*2767*3855# Dial this after backup n let the phone to restart itself.

On most cell phones, to redial the last phone number dialed, press the green phone icon when the keypad is displayed on the screen. You can only redial the last number dialed. To obtain a copy of the user manual, follow this link and download the pdf. http://www.gsmarc.com/huawei/ascend-g610/manual/

frnds...ungaluku Nokia BH 104 la songs kekkanuma..android appsla mono Bluetooth router download pannunga...easya songs kekkalam...enjoy..

could be time for a tune up also check the spark plug holes for oil if the valve cover gasket are leaking into there can also have a bad coil if the check engine light is on have it scanned at a auto parts store (most do it for free)the code can lead you to the bad cylinder exp code p0301 is cylinder number one p0306 is cylinder number six and the same for p0302-p035

Just hold the particular number for long then a wizard pops up. choose your number and you are ready to use speed dial. and do vote my answer below with the thumbs symbol

Go to menu -> settings -> network settings. Go to select network and set to 'automatic'. Then go to network mode and set to 'automatic'. If this doesnt work you may have to contact your mobile operator.

Install latest pc studio from Samsung.com

Than connect your corby pop with pc.

Your driver will install automatically.

Than manually create a dial up modem -- start> accesories>communications> new connecion wizard>"Next"> click " connect to the internet"> click "setup my connection manually">click"next

">click "connect using dialup modem">.enter "ISP name"> etc etc
(ask the setting by calling customar care)

Dial *99#(ask custumar care for dialing number) from your phone that helps to connect it and you will find that your corby works with your pc and you can access the internet

Yep. Those are speed dial numbers. They are programmed from ext 101 or the main phone. Without picking up the handset, press PROG **1234 and dial 001 and ENTER. Dial your 3 digit speed dial number If there is something there, it will be displayed. A speed dial number is stored with the trunk access code in it (usually 9) so if you're putting in a new number, include the "9" plus the number exactly the way you dial it. Dial your new number with the access code and press ENTER.

Number changed :-)
You can keep putting in a whole boatload of new numbers with this procedure.

Carl

Okay for starters, you need to check to see if that fax machine is automatically answering the phone when it rings. you can check to see if it is trying to recieve by call that phone number from another phone and listen if it answers and when it does, does it make a high pitched squelling sound that varies in pitch.
if it does then it should be working ok, if not then you must program your recieve mode to automatically answer.
you can also check to see if it's sending by doing the opposite: put a sheet of paper in the machine to fax and dial your cell phone or other number, when it rings pick it up and listen for the high pitch squeel, if it works then your fax is working properly.

Thank You,

Mikey