My kodak esp3 print will not install on my computor and i do not have cd

Please go to the Kodak model ESP3 multi-function printer support page by clicking on the link below, or copy and paste into your browser.

Print the instructions for installationo of the software / drivers, then download and follow the prompts to install the Kodak ESP3 multi-function printer.

Make sure you select the operating system on your computer, ea XP, Vista or Windows 7.

Good Luck

http://support.en.kodak.com/app/answers/detail/a_id/36460/selected/true

Don't have a solution but can confirm this printer seems to be full of bugs. I have reinstalled software twice which gets the printer going for a very short time only. It does not recognise the Kodak ink cartridges..! Very frustrating.

www.kodak.com/go/printheadsupport

Download HC software and install it.
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=12815&product=EKN035496


Thanks

Take the CD-ROM that came with the printer, and install the software.
When prompted, connect the printer to your computer.

If you have lost the CD-ROM disk, you can download the software from Kodak's web-site.

Go to Kodak's website to see if install program can be installed. If not found there, do a websearch for kodak esp3 all in one help download. I hope this helps.

For that problem kindly try doing the ff:

* Re-seat the inks both color and black then try printing
* Re-seat the Printhead of the printer then print again
* if problem still persist call 1800 421 6699 and the technical rep will replace the printhead

Hope this will help

Thanks
Byron

a) Load the Kodak Inkjet Printer Software CD into the
CD-ROM drive. Follow the on-screen prompts
when the instructions appear.
If instructions do not appear, click Start, then Run.
Select CD-ROM drive and type setup.exe, then
press ENTER.
b) Connect the USB cable to the printer when
instructed. Continue to follow the on-screen
prompts until installation is complete.
Do not connect the USB cable to
the printer until instructed during
software installation.
USB

To set the printer as the default:
In XP:
Start Printers and Faxes
Right-click the icon for the printer you want to use as the default printer, and
then click Set As Default Printer.
In Vista:
Start Control Panel Hardware and Sound Printers
Right-click on the printer you want to use, and then click Set As Default Printer.
Here is the setup guide:
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/ESP3/1K3687-ESP3-setup_en.pdf

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

phone Dell Computer. They have finiky computers.

For that problem kindly try doing the ff:

* Re-seat the inks both color and black then try printing
* Re-seat the Printhead of the printer then print again
* if problem still persist call 1800 421 6699 and the technical rep will replace the printhead

Hope this will help

Thanks
Byron