Trying to setup my new Epson sx525wd printer to my Netgear dg834gt router- keep getting blue corruption screen on the laptop or computer everytime I try installing.

In the Epson setup there should be a wireless menu, you can find a user manual here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=182959&infoType=Overview

Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = passwordYou can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

i guess this may help
http://www.portforward.com/english/routers/port_forwarding/Netgear/DG834GT/Xbox_Live_360.htm
let me know if further help needed

The router firewall only blocks connections coming from the internet.

Basically it only lets an outside IP connect to your network if you establish the connectoin FIRST.

The most common cause of not being able to see another PC on the LAN is not having the same workgroup name.

Go to Start > My Computer , right click > Properties > Computer name. Make sure all PCs have the same workgroup name.

All you should need to do is go through the basic setup screens and enter your talk talk username and password - the rest of the settings should remain as default.
If you can logon to your old router, have a look at all the settings and copy them down to enter into the new router.
Let me know if you still have problems (I'm on talktalk too)

You need to use the desktop computer to access the Netgear page. Check the default gateway address of your desktop (this is the IP address of your Netgear). You may follow these steps if you don't know how to check the IP address of your desktop:

1. Go to the Command prompt or DOS prompt. Type in ipconfig and press enter. Check the Default Gateway address.

no you can't use the belkin usb 10/100 ethernet adapter CD to install the netgear adsl modem.
click here to download the installation manual for the netgear device

how do i connect the netgear dg834gt to my computer please help

you may have to turn on the wireless feature in the router.netgear will help you to fix it.go to their site or call them for help.