Washing machine stopped working,no power,no display checked fuse,fuse ok.hotpoint wt761

How to change the drive belt on washing machine Hotpoint

SOURCE: have a hotpoint wt761 washing

http://www.recommendedbuys.co.uk/household-appliances/washing-machines/hotpoint-wt761.htm

as you can read in these site that is a grate problem with the model allso the company tech is talking about to chage the machine insted repair so all I can say is that you have problem with the computer board of the machine,

Crash on progrmming

possibly mains lead you need to check there power coming out from mains filter the other end of lead-if not you can purchase a lead complete

First, try turning off the mains power to the machine for 30 minutes and switching it back on to see if the error persists. This indicates a problem with the heater relay or heater. This usually means that the relay cannot be operated due to a heater fault and that the heater will need replacing. A service call to replace it will be the quickest option.

You have a blockage not allowing the drum to empty.
Check for blockages via the pump filter and the hoses
F05 means blocked pressure switch
If it still won't work come back to me

If it works fine with the heater off then i would say that fault appears to be element..the readings you get seem okay, put you meter onto megs and check, with wires off if you get electrical leakage between live and earth...Body....of element, it could be element is heating with no water in machine causing it to burn out..this is a problem with this machine...Wish you well

call in hotpoint

the h2o message means the machine isn't getting enough water. check pressure and water intake pipe.

http://www.recommendedbuys.co.uk/household-appliances/washing-machines/hotpoint-wt761.htm

as you can read in these site that is a grate problem with the model allso the company tech is talking about to chage the machine insted repair so all I can say is that you have problem with the computer board of the machine,,,,good luck and rate me