Hotpoint Ultima WF860 Front Load Washer Logo
Posted on Oct 25, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Hi I have a hotpoint washing machine model wt761 and it has stopped working, it will not drain. The display is showing an error code F-05. Can you help me please.

1 Answer

Howard Galley

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Governor:

An expert whose answer got voted for 20 times.

  • Expert 197 Answers
  • Posted on Oct 25, 2009
Howard Galley
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Governor:

An expert whose answer got voted for 20 times.

Joined: May 09, 2009
Answers
197
Questions
1
Helped
57231
Points
557

You have a blockage not allowing the drum to empty.
Check for blockages via the pump filter and the hoses
F05 means blocked pressure switch
If it still won't work come back to me

  • brendelliott Sep 02, 2010

    Where is the filter please?

  • Crallott May 03, 2011

    Where is the filter please

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have flashing lights on Hotpoint WT761 washing machine when I turn it on?

SOURCE: have a hotpoint wt761 washing

http://www.recommendedbuys.co.uk/household-appliances/washing-machines/hotpoint-wt761.htm

as you can read in these site that is a grate problem with the model allso the company tech is talking about to chage the machine insted repair so all I can say is that you have problem with the computer board of the machine,

0helpful
1answer

Water wont pump out code f-05

Clogged drain pump.
Check the drain pump filter. Use a flashligth and you will se if the impeller is stuck on something. If not check the hose from the drum to the drainpump housing. May be clogged.
If not, replace drainpump
0helpful
1answer

My hotpoint wt761 is okay on pump out but nothing happening on spin and showing no error code

Could well be worn motor brushes if no action from the drum>Common fault on machines over 4....5 years old...Parts cost around £18....Fitting quite simple...Good luck
1helpful
1answer

Washing machine stopped working,no power,no display checked fuse,fuse ok.hotpoint wt761

Check the power outlet, the plug and the cable or with the appropriate tester see if you have mains power where the power cable connects to the machine wiring.
0helpful
1answer

Hi I have a hotpoint washing machine model wt761 and it has stopped working ,no display no power ,nothing ,ive changed the fuze in the plug but to no avail, please help .

possibly mains lead you need to check there power coming out from mains filter the other end of lead-if not you can purchase a lead complete
2helpful
2answers
4helpful
3answers

F-05

F05 machine means "Pressure switch jammed"

Try first cutting power to the machine for two minutes, if that reset the code, then the problem was temporary.

If not :

Check if the machine drained, or if water is not being drained.

If drain system works .take off the the lid , locate the switch, it must have a small hose attached.
Remove the rubber hose attached to it, and unlock it by blowing into the hose.

If the water does not drain, this will also cause the pressure switch error.
In this case check the drain hose , and the drain pump.

Finally, ta faulty timer control board can cause the error, you test the control PCB if lid switch and drain system are OK.
3helpful
2answers

After about 10 mins error code H2O is displayed.

the h2o message means the machine isn't getting enough water. check pressure and water intake pipe.
0helpful
1answer

Have a hotpoint wt761 washing machine which is displaying a f-08 error code

http://www.recommendedbuys.co.uk/household-appliances/washing-machines/hotpoint-wt761.htm

as you can read in these site that is a grate problem with the model allso the company tech is talking about to chage the machine insted repair so all I can say is that you have problem with the computer board of the machine,,,,good luck and rate me
1helpful
3answers

Hotpoint ultima wt741

washing machine WT741 ultima all light are flashing and it won't do anything else
Not finding what you are looking for?

858 views

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...