Hi i just removed the battery and the simm , blew to remove dust then put ererything back togerther and know the fon want work. it powers up and then on the screen it says "Insert Sim", what could it be wrong ?
The fon was working fine before i took it apart.
can you help please
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Possible errors or malwares in the software that is hanging up the phone. It will be good to remove the memory card and scan for any fault. If so remove the files and format . Now keep the battery OFF the set for about 30 minutes. Once the battery is set back if the set boots up to work well the problems seems solved but if not the software must be reinstalled.
Sound like your phone is done for. But try this first. Remove the battery, remove the simm card. Wait 10 minutes. I can assume the battery is good (as that's the #1 reasons for phone problems) Unless you can test the battery with a meter or use the battery in an identical phone don't assume its good. Then replace the simm, put tha battery back in and give it a try. Doesn't power up.?? Head on over to the phone store of your choice. Good luck.
most sim cards are located under the battery. remove the back of the phone, then remove battery, you should see a place for the sim card, just slide it in but make sure you put it face down and the right way round, theres usually a little diagram showing the correct way
Hello there. please try to re-install your phones driver and the next time you insert your phone to your computer use another usb port and not the same you have been using all this while. hope i helped bye!
try removing your batt or set your fon to its factory settings,,, if nothing happens.. visit your nearest service center and have your fon reformat. that solves your prob... your fon has software problem...
I had exactly the same problem. After unsucessfully looking for a solution on the net I removed the simm chip and set it aside. The next day, I put it on PC usb charge and left it overnight. The next day, I powered it up and it worked. I turned it off and replaced the simm and it is now working fine. Go figure...