How can i active or desactive the FWD/DND in the model. KXT7730?

What happens when you dial 165 on the intercom? If you get voice mail, then try dialing 7104 165 # on the intercom. That sets CF-No Ans to voice mail for your set and the FWD/DND button should light solid (or not, it's a program option) or flash. If you dial 7101 it should turn on Do Not Disturb (7100 cancels). In DND, the FWD light should flash.

Once you have set these two conditions up, the FWD/DND button has 3 states, FWD, DND, and OFF.

Carl

If you have not found an answer to this as yet just pick up intercom and enter 7100 at the phone. This will clear any DND. Now enter intercom 7105165. This will give a long tone and the DND/FWD lamp will flash showing Call forwarding active for VM.

Try this: • PRESS PROGRAM • DIAL ** • DIAL 1234 (SYSTEM PASSWORD) • DIAL 000 (DATE AND TIME PROGRAM NUMBER) • PRESS THE NEXT KEY • ENTER THE YEAR • PRESS THE ARROW (FWD/DND) KEY • PRESS THE SELECT (AUTO ANSW/MUTE) KEY UNTIL DESIRED MONTH IS DISPLAYED • PRESS THE ARROW (FWD/DND) KEY • ENTER THE DAY OF THE MONTH • PRESS THE ARROW (FWD/DND) KEY • PRESS THE SELECT (AUTO ANSW/MUTE) KEY UNTIL THE CORRECT DAY OF THE WEEK IS DISPLAYED • PRESS THE STORE KEY • PRESS THE NEXT KEY • ENTER THE HOUR • PRESS THE ARROW (FWD/DND) KEY • ENTER THE MINUTES • PRESS THE ARROW (FWD/DND) KEY • PRESS THE SELECT (AUTO ANSW/MUTE) KEY FOR AM OR PM • PRESS THE ARROW (FWD/DND) KEY • PRESS THE SELECT (AUTO ANSW/MUTE) KEY FOR A 12 OR 24 HOUR CLOCK • PRESS THE STORE KEY • PRESS THE END (HOLD) KEY • PRESS THE PROGRAM KEY TO EXIT PROGRAMMING
If this helps you, please rate. Thank you

Typically this is controlled by the status of the FWD/DND button and indicated by the button light.
button light off: Forward and Do Not Disturb off
button light blinking red: Forward on
button light solid on: Do Not Disturb on

The functionality of this button can be customized by the phone system installer. If the method outlined above does not work the status and activation of this feature can be accessed through the staion programminng. To use station programming press <program> then scroll through the features using the LCD screen navigation keys or enter the specific program number. To program FWD/DND the program number is 50.

I'm guessing that you didn't mention that the phone doesn't work, it must be in FWD mode. You can cancel CF, or get someone to go into 990 area 9 bit 3&4 and reverse the bits so it will be solid on FWD and flashing on DND.

Carl

Try pressing the FWD/DND button and look at the display. It might have 3 steps, FWD, DND, and FWD/DND Off. When you reach the Off part, the light will go away.

Carl

It's supposed to be. That's what forwards unanswered calls to voice mail.

If you need more info, post back with your system model number and the voice mail model.

Carl

If the FWD/DND light is lit solid, the extension is in DND if it's programmed properly. You can test this by pressing the FWD button and reading the display. It will clear and press it again and it will set and tell you what it did. (if DND and FWD are both set it shows 3 states).

At the phone, press intercom and dial *710x where x=2 for all calls, 3 for busy, 4 for no answer or 5 for busy/no answer plus the extension of the voice mail plus #. Your FWD light should blink and you have now set FWD to voice mail.

Carl

1) Press PROG, follow by programming no. 50 or FWD/DND button.
2) Press ENTER or STORE, follow by selection no. 0=OFF FWD/DND, 1=ON FWD/DND.
3) Press ENTER or STORE to save the setting.
4) Press EXIT or PROG to quit setting mode.

YBC (/\)

Press PROGRAM + ** + User Programming Password (default is 1234)

Press 000
Press NEXT (Sp-phone button) : The date will be displayed.

To change the DATE (or you can press next again to go straight to change the TIME)
Enter the year (last 2 digits)
Press --> (FWD/DND button)
Keep pressing SELECT until the desired month is displayed
Press --> (FWD/DND button)
Enter the day
Press --> (FWD/DND button)
Keep pressing SELECT until the desired day of the week is displayed
Press STORE

To change the TIME
Press NEXT (Sp-phone button): The time will be displayed.
Enter the hour
Press --> (FWD/DND button)
Enter the minute
Press --> (FWD/DND button)
Press Select for AM or PM
Press --> (FWD/DND button)
Press Select for 12 or 24 clock hour
Press STORE (Auto Dial button)
Press END (Hold button) to exit