I cant program my dishnetwork remote to control my flat screen w-house tv . I tried all codes provided in the dishnetwork manual can you help me?

Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes

Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...

My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...

Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya

gregpayne67,

In order to control your Hitatchi TV with your dish remote you would need to program it. The codes needed depend upon the model of your receiver, though I can provide some general codes. Below I have provided some codes and a link for more information and the steps to program the remote!

Codes: 585, 638, 665, 668

Link: http://www.dishnetwork.com/SupportSection/remote-setup

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

Feel free to let me know if you have any other questions or you can email me at [email protected]

Tommy Faust
DISH Network

First, try pressing TV on the remote, check if that solves the problem. Then press Sat and try the TV power button again. If the remote previously controlled the TV, you lost the code for the TV. If you have your Dish Network manual, check if you wrote down the code when it was originally programmed. Which specific remote/receiver do you have? The programming directions and code lists are available here: http://www.dishnetwork.com/supportsection/remote-setup . You can also scan all of the codes to find the correct one: see http://www.dishnetwork.com/SupportSection/power-scan-instructions . Additional remote/receiver manuals are here: http://www.dishnetwork.com/SupportSection/manuals .

The direct coding procedure for the Dish remote that I have is: while facing the TV to be controlled (after adjusting the key for TV1/TV2 in a multiple TV system), press and hold TV until all four indicators light up. Then enter the 3 digit code. Press and release the # key. Then see if the code TV powers off when you press Power. Then press Sat and check if the TV power button works. Try additional codes if the TV doesn't respond.

If you recently got a new TV and you tried to program the remote for your TV, your dish remote may not have the code you need. (Most universal remotes are limited to codes for devices released 6 months or more before the remote was programmed.) In that case, you should use the TV remote (and see if it has an option to control the satellite receiver). Alternatively, get a new universal remote that will control all of your devices. (The remotes that can be programmed by USB are the easiest to set up.)

I hope this helps.

Cindy Wells

ablesmichell

What are you trying to program your remote to? I have provided a link to the steps for programming the remote to your TV or receiver. If you are trying to program to another device, please respond to this site. If you are trying to program to your TV, I have also provide a link with the different codes for each type of TV. I hope this helps.

Remote instructions: http://www.dishnetwork.com/SupportSection/remote-setup
Remote codes:
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

Ray Calo
DISH Network

cathyw43

I have provided instructions on how to program your DISH remote to your TV. I have also provided a link with the codes for TV manufacturers. I hope this helps.

Program remote, step 6:
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml
Ray Calo
DISH Network

Hi tbombertigermy name is Mike Houston of DISH Network and I was going over your post and Isee where your Emerson TV needs to be programmed to your DISH Network remote. Ihave the codes 569, 632, 505, 516 and 004. What you will want to do is holddown the clear TV button for 6 seconds and then press in the three digit codeand the # button. If these keys don't work we do have a step called Power Scanand I will send the link to help with the setup. http://www.dishnetwork.com/SupportSection/power-scan-instructions

leoidalgo

I have provided the remote codes for your Zenith TV. I have also provided a link with instructions on how to program the remote to the TV. I hope this helps.

Remote codes: 501, 652, 766, 500

Program remote, step 6:
http://www.dishnetwork.com/SupportSection/remote-setup
Ray Calo
DISH Network

wwoodzy

Some TVs will not provide all the features of the TV or won't work with out DISH remotes. I have supplied all the available codes for the Emerson TVs. I hope this helps.

TV codes:
541, 544, 632, 537, 526, 534, 536, 590, 627, 636, 642, 648, 652, 654, 655, 657, 658, 659, 660, 661, 662, 665, 666, 667, 669, 670, 677, 679, 682, 692, 696, 699, 720

Program remote:
http://www.dishnetwork.com/SupportSection/remote-setup

Ray Calo
DISH Network

Hi, Hope this helps. I used code 720 for my dish remote to remote my ilo tv. It works great. Hope it works for you. Bob

Call Dish Network at 1-888-284-7116 and they can walk you through the remote program setup. Or you can look in the instruction manual for code searching using the DN remote control.