Question about Sanyo 42 in. LCD TV
Trying to program the dishnetwork remote with the sanyo tv's remote code. Sanyo is model number dp42647
Posted by Anonymous on
To whom it may concern,
1. Point the remote in front of the desired television.
2. Press and hold the "tv" button at the top of the remote, until all the buttons at the top flash.
3. Type in "590" on the keypad.
4. Press the # key at the bottom of the keypad.
The tv button will flash 3 times. Your remote is now linked to your Sanyo television.
Best of wishes,
If you need further help, I’m available over the phone at https://www.6ya.com/expert/brian_142c5ec89a7a3fda
Posted on Jul 22, 2016
Posted on Dec 16, 2015
The code for a Sanyo TV set should be 100. Press and hold the TV button on the remote while entering the code. The light should blink 5 times if it was accepted, and then you can test to see if it worked.
Posted on Feb 10, 2008
SOURCE: need Sanyo TV code numbers
These are the codes for Sanyo TV'S for this remote. The newer TV codes are at the end so work in reverse order when inputting these codes. Thanks for using Fix Ya.
542, 589, 590, 591, 592, 609
Posted on May 25, 2009
Hi there! The panel may be in protection mode. The Inverter board is the most logical area to start after checking power supply Voltages.(5,6,24 and 13Volts). There may be coils on the Inverter Board which have bad soldering or faulty. Other than this it may be main board which controls switch on or off. If all else fails, refer to a repairer. Beware of High Current!!! Best Wishes and Good Luck, Jus004
Posted on Aug 23, 2009
SOURCE: Sanyo FXTG remote
Hi having a quick read trough the manual and finding the remote on the internet suggests this is the correct remote for your TV. The remote is not a universal remote so no programming is possible or necessary
Posted on Mar 19, 2010
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: