DishNetwork Remote won't program to control ilo EDTV

Hi I seeyour looking for remote codes for the Invoca to program to DISH Network receiver;we do not have codes for other remotes to program to our equipment. If you wantwe can help to get you the DISH remote to work your system, I will leave my e-mailfor you if there are any questions. [email protected]

If you have not found the codes yet, follow the link below. The link will walk you through the steps to program the remote to the tv. They are simple steps.
Codes:
http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf

If the codes do not work, try this link for a power scan, which will scan the tv for the correct code.
http://www.dishnetwork.com/SupportSection/power-scan-instructions


Becki Barned
DISH Network Customer Service

You may have found the code already, but here are some codes and steps to help you out if you have not. There are two links enclosed below. The first link is for a power scan, where you can scan the tv for the right code.
Power scan:
http://www.dishnetwork.com/SupportSection/power-scan-instructions

The second, is a list of codes. If you choose to go this route, then you will need to follow these steps:
1. Hod down the clear TV button until all lights light up at the top of the remote
2. Punch in the 3-digit code
3. Press the pound (#) button under the number 9 on the numeric keypad
4. Try the volume and powering the tv on/off. If one or all of these functions do now work, start back at step 1, with a different code.
Codes:
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml


Becki Barned
DISH Network Customer Service

customz28,

Since you have tried several codes for your TV, the next procedure to attempt would be a power scan. I have provided a link with the instructions. The link is:

http://www.dishnetwork.com/SupportSection/power-scan-instructions

I hope this helps.

Ray Calo
DISH Network

I recommend you switch from using HDMI cables to using component (R/G/B RCA-style) cables. HD picture is superior through component cabling, and solves several HD picture issues.

What is happening is that when video resolution changes (like from regular programming to commercials) the video information is poorly sent down the HDMI line. Component cabling from your DVR will eliminate this problem.

I hope that helps.

coach_gill,

You may need to readdress the remote to your receiver. I have provided a link on how to program the remote. The link is:

http://www.dishnetwork.com/SupportSection/remote-setup

The programming steps are in the middle of the page. If you still have problems, you can call 1-800-333-3474 for technical assistance. I hope this helps.

Ray Calo
DISH Network

http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/remotes/TechRemo2wayCode.shtml

i would suggest programming your dish remote to your tv,

nope sorry 
doesn't work for some reason trutech which is made by daewoo uses a nasty form of remote controll unless you are willing to spend 99.99 for a logitech remote controll there isn't jack you can do.

Call Dish Network at 1-888-284-7116 and they can walk you through the remote program setup. Or you can look in the instruction manual for code searching using the DN remote control.