Configure Rate Limit on S2700&S3700&S5700?
When you configure rate limit, the following configuration is recommended:
· Set the CIR, CBS, and PBS values but not the PIR value.
· CBS = 200 x CIR
· PBS = 2 x CBS = 2 x 200 x CIR = 400 x CIR
The CIR value is expressed in kbit/s, and the CBS and PBS values are expressed in bytes.
Set the rate limit for outgoing packets on the interface to 10 Mbit/s.
[HUAWEI]
interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1]
qos lr outbound cir 10240 cbs 2048000
Set the rate limit for incoming packets on the interface to 10 Mbit/s.
[HUAWEI]
interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1]
qos lr inbound cir 10240 cbs 2048000
NOTE:
A traffic policy can be used in the physical interface view, Eth-Trunk interface view, and VLAN view.
×