Hiiii! i dont really have a problem but everytime i try to take a picture of myself in the mirror the flash makes the picture all bright. i look at other peoples pictures when they do that and theres only a little tiny flash. and mine makes a big flash. i cant find the turn off flash button anywhere in my camera. can someone tell me how to turn the flash off!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
iT DOES NOT CHARGE THE LENS. iT IS PROBABLY CHARGING THE FLASH THAT IS CAUSING THE DELAY. tRY IT WITH THE FLASH TURNED OFF MANUALLY AND SEE IF IT WORKS, iF SO, GOOD INDICATION THE BATTERY IS WEAK, NOT HOLDING AN STRONG CHARGE AND NEEDS REPLACEMENT.
Depending in the model of camera, check the menu for more specific settings. Some models you could turn the flash off or on and in giving points even red eye corrections, so chec your camera menu for settings.
When taking pictures, you must really be allowing time for the camera's flash to be charged before you could take another picture so that camera will have enough time to rest and it could function normally.
But if the camera was dropped, then it's really causing those kinds of issues like flash will not work properly.
You could still try these steps below:
First, do the POWER RESET: - Turn off camera - Remove batteries for a minute - Reload batteries - Turn on camera
Second, do the MASTER RESET
- Be in AUTO mode - Press on MENU button - Press on the right button until you see SETUP 2 - Scroll down until you see RESET - Press the right button to pick up on YES or NO - Press on OK/MENU button for changes to be saved
- Turn off camera for a few seconds so that settings will be refreshed
Turn it on and take a picture.
When you want to have just the AUTO FLASH.
- Rotate the mode dial to PROGRAM
- Press the LEFT/FLASH button until you've seen the
LIGHTNING icon with the Letter A on the leftmost part of the screen
- Try to take a picture by pressing and holding the shutter button
halfway first for 3-5 seconds and then press it all the way down
Here's a couple things to try.
It has an auto focus. This may require you to hold the camera's shutter button half way down to get the focus. Then press it all the way down to get the picture.
Make sure the flash is working or that you have enough light. It's really hard to get a pic in the dark.
Resolution may also be a problem. Resolution is how many pixels it takes to make a picture. Bump it up to the highest resolution on this cam. 2.11 Mega pixels If nothing else it will make prints look sharper.
I hope this helps.
That happens to me once in a while...Just when I feel like throwing in the towel, it starts working again! But I am actually having a problem right now: Even with fully charged batteries, the camera goes into "low battery" mode when I turn it on, and right now I can't download some really important pics...ARGGGHHHHHH!!!!!!