Phillips Magnavox Rem-350 Remote

Question 1

1helpful

1answer

Need instructions to set code for tv

1 Download or view the user's manual from the Magnavox website (see Resources). You will need the list of codes included in the manual. The website will direct you to the closest remote control manual available similar to the REM 350 Universal Remote. This manual is compatible with the REM 350 Universal Remote.

2

Press and hold the "Code Search" button until the red indicator light stays on. Release the "Code Search" button.

3

Press and release the "Mode" button for the product you wish to program (TV, VCR, DVD or satellite). The red indicator light will blink, then stay lit.

4

Enter the four-digit code from the code tables listed in the user's manual. You can also search for the code online at the Philips Universal Code Finder page (see Resources). You might have to try several or all codes listed in the manual until you find the correct one. After a valid code entry, the red indicator will turn off. With an invalid code, the red indicator flashes.

5

Press the "Channel Up" button with your device on (TV, DVD, VCR, or satellite). If the device responds, you have completed the programming. Once are certain you have found the valid code, make a note of it somewhere so you will not have to search for the code again.

Jan 14, 2011 • Philips Magnavox REM-350 Remote Control

0helpful

1answer

Lost my instructions

Hi,

You could try the Philips-Magnavox links on this page:
http://www.xdiv.com/remotes/

Hope this helps

Chris (ziraffa)

Jan 11, 2009 • Philips Magnavox REM-350 Remote Control

0helpful

1answer

Philips Magnavox REM-350 Universal Remote ENTER/SELECT Key Proble

See if fresh batteries help.

Nov 16, 2008 • Philips Magnavox REM-350 Remote Control

0helpful

1answer

I have lost my manual and need to reset my code for a sylvania tv

need remote codes for my mag tv as well as toshiba dvd player i have universal mag remote

Aug 21, 2008 • Philips Magnavox REM-350 Remote Control

1helpful

2answers

Jackie

I need a code for my television. I have a sanyo tv., the remote i have is a philips magnavox. my email is: [email protected]

Aug 14, 2008 • Philips Magnavox REM-350 Remote Control

16helpful

2answers

Hotel TV remote

for phillips tvs that come out of a hotel try this code with RCA universal remote. the big remote not a small remote. 319753 followed immediately by the mute button. this will pull up the tv setup menu.

Jul 31, 2008 • Philips Magnavox REM-350 Remote Control

0helpful

2answers

Philips rem 350 manual

this is bulshit!!!!

Jul 11, 2008 • Philips Magnavox REM-350 Remote Control

0helpful

4answers

Philips magnavox rem 350 programing

Manuals and codes here http://www.urc.philips.com/

Feb 25, 2008 • Philips Magnavox REM-350 Remote Control

0helpful

1answer