How to get a motorla out of boot loader mode?

I Charged the battery up using another motorola phone,and then I did a software upgrade, and this has fixed the problem.The phone is working great now,all photos or videos were saved.
What i think caused this error is that the phone was doing an upgrade and then I got a message at the same time,I think these clashed some how and prevented the upgrade from completing,hense causing an error on the boot loader.

Hope I helped

Chris

It is probably BOOT.INI. However, might be anything from a virus to manual mistake, altho this file should be hidden.
HDD Regenerator: http://www.softpedia.com/get/System/Hard-Disk-Utils/HDD-Regenerator.shtml free trial will help you check the HDD.

At you the program has flied, the software loader therefore is loaded. You should program phone again. Programs are for this purpose necessary the driver, cable USB. Or give to repair.
http://heaters.agilityhoster.com/

my moto v3i just stopped turning on. everytime i press the power button, the keypads just lights for about 1 second ands then turn off again. i tried to use the combination key, POWER BUTTON (+) * (+) # and then the screen displays the BOOT LOADER thing so i thought this phone might be ok

To solve that problem please follow this guide.

download the exact same flash file R374_G_OE.42.15R

flash it and your phone will be revived

Check your cord , sometimes cables are charge only, and some are for transferring data, (data -only) cords.

pls update ur phone software see the link for US or try other on the page for ur region if differrent

http://direct.motorola.com/hellomoto/motosupport/source/SoftwareUpdateSelect.asp?country=USA&language=ENS

pls rate me FIXYA if u got help

I beleive that you are installed windows first and linux second,then dual booting will be configured automatically ,means linux will install the grub (boot loader)and configure it with what all Os u have.If your system is not booting and showing grub menu do one thing ,boot it from a linux cd and reinstall grub.

you will need to reprogram your phone with a compatible firmware..

what you need:

usb cable (comes with the phone package)

software and flashfiles.. (contact me personally for this)


YM: gieroquiazon

hello sir