No ring tone,no message tone, no dial tone and can't hear people when i am connected them.

I have a dial tone but can not make calls. and if the phone ring they can hear me but I cannot hear them

Direct Line:
1.Check telephone line.2.Make sure telephone line is connected in line in port not in extension.3.connect extension telephone phone to the device & check for the dial tone.
Dial the number and observe weather extension phone is ringing?
A. *If extension phone is ringing check display is there any message like "ringing".. wait till fax tone comes,if not check "basic fax settings"... if setting are OK .. Replace formatter
B. *Extension phone is ringing no message displayed on device replace "LIU" card..
If extension telephone is not ringing check telephone line..
No out going faxess:
*Check line is connected though EPABX , if connected Check..prefix setting..
*Check out going..
Best of luck...

First of all, be sure that the connection you have configured on the computers are Dial Up connections.

If you have restrictions activated on the telephone line, removing them might help. Some other services of your telephone provider can also prevent your modems to properly detect the dial tone. It might be worth to take a look in that direction.

It might also be a problem with the telephone line. Try also to dial the number normally entered in the dial-up connections. You should hear a ringing tone shortly followed by noises similar to a fax machine. If you hear this, you access correctly to your providers dial up server and the problem would be with the two computers.

Which make and model of phone is it?
Are you pressing the green call button beforew you try to enter the number you are calling?
You should enter the number first, then press 'green'
You wont hear a dial-tone like a landline phone

If you take your cell-phone, and dial the telephone-number of your printer, what do you hear from your cell-phone? Dialing? Ringing? Busy signal? What do you hear from the printer? Ringing? Answering? The "high-low" speed-negotiation squawking?
Any messages on the printer's LCD screen, when it is "answering" ?

This is probably because dial tones and ringing tones are part of an archaic system. Your cell phone still makes these noises as a courtesy, and you hear the dial tones/ringing tones when you make regular calls because your phone is communicating with the standard phone system.

dial tone but mobiles ahve no dial tone when making or receiving calls.....

The problem was the main phone line not the phone itself

Activating Call Forwarding

You can activate Call Forwarding whenever you want your calls to be sent to another phone, including a mobile phone. Once activated, all your calls will be sent to the forwarding number you request. Each time a call is forwarded, you will hear one short reminder tone on your home phone, but you will not be able to answer the call from your home number.

1. Lift your telephone's receiver and listen for a dial tone.


2. Press *7 2.
In some areas you must use 72#
Dial 1172 on rotary or pulse-dialing phones.


3. At the tone, dial the telephone number where you want your calls transferred.
You will hear the number you entered ring. When the number is answered, Call Forwarding is activated.


4. If the call is not answered or the line is busy, hang up and call the number again within two minutes.
You will hear two short tones telling you that Call Forwarding is activated.


5. Hang up the receiver.

Deactivating Call Forwarding

Turn Call Forwarding off when you want to receive calls on your home phone.

1. Lift your telephone's receiver and listen for a dial tone.


2. Press * 73.
In some areas you must use 73#
Dial 1173 on rotary or pulse-dialing phones.


3. Listen for two short tones.
Call Forwarding is now off and you will receive your calls at your home number.

If the caller hears ringing after dialing the home but the not ring inside home. That means the number is active but the wiring inside home is faulty/ not properly connected. A phone rings /or works of a basic system. Two wires usually red/green as primary. If either one is broken or improperly connected the phone inside will not ring. That doesn't indicate a short. If it was a short the caller would not hear ringing at all. So the first thing you must do is the track the cause. Make sure home phone is plugged securely into phonejack. Still no dial tone check all other jacks inside home. If still no dial tone. Contact your service provider. They will need to send a technician to check the Demarcation point. Which simply means the connection point where the service provider wires , meets the customers house wires. They just need to verify this connection