Washing Machines Logo

Related Topics:

Posted on Oct 07, 2010

CDA washer/dryer displaying E14 error code after running for 5 mins, then stops

3 Related Answers

A

Anonymous

  • Posted on May 10, 2008

SOURCE: error code e14

E14 Dryer temperature probe in short circuit or interrupted

Ad

Anonymous

  • 2 Answers
  • Posted on Dec 30, 2009

SOURCE: I have a siemens WDI 1640 washer/dryer which is

I managed to find out the fault code E14 relates to faulty Heating element, product code 494069, and have been quoted £65.00 + Vat for the Bosch replacement. I am yet to decide on how I will proceed.

Anonymous

  • 2501 Answers
  • Posted on Aug 05, 2010

SOURCE: whirlpool intergrated washer dryer model

I have had a similar message form my machine and the only user action possible was to clean the pump.

It may be the same with your machine so follow your instructions for this.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My dryer keeps giving an E 14 error code. Even after resetting it, it runs for about two minutes & flashes the code again. How can I fix this?

Bosch Washer Dryer ' Neff ' Siemens ' Integrated ' Error Codes

www.ukwhitegoods.co.uk/.../fault-codes/...fault-codes/3312-bosch-neff-s...
Jan 16, 2012 - Bosch, Neff and Siemens integrated washer dryer error codes and ... The error codes in this article pertain to integrated washer dryers ... E14 ...

how to mend it .com - error code E14?

howtomendit.com > Household Appliances, Washing Machines
Bosch washer/dryer wvti3240 stops wash and displays error code E14. Can anyone help please ? also a full list of the error codes applicable to this machine ..
Nov 03, 2015 • Dryers
1helpful
1answer

I have a Frigidaire Front Load Washer during its cycle usually 24 and 16 min into the wash cycle it will stop and beep giving a E10 error message. What does this mean?

The cause of the error is that no cold water is getting through the cold water valve (inside the machine).

The E10 error indicates that one of a group of error codes occurred. The specific code could have been one of the following:
  • E11 - Fill time too long. (See test 1 below)
  • E13 - Water leak in the tub or air leak in the air bell. (See test 2 below)
  • E14 - Dispenser drawer reed switch is open. (See test 3 below)
To recall the specific fault code from this group, follow these steps:
  1. Wake the machine by pressing any button
  2. Wait 5 seconds
  3. Press and hold the Start and Pause/Cancel buttons simultaneously
  4. All LEDs will go blank and after a few seconds the control will signal the stored code
Based on the specific error code, follow the specified test and troubleshooting.
The magnet for the dispenser drawer reed switch is shown in the second image below. If this magnet is missing, you will get the E14 code.
Some of the troubleshooting provided is intended for service technicians. Do not conduct any test or troubleshooting that you are not completely confident that you can safely complete. Unplug the washer before accessing internal components.

http://appliancejunk.com/forums/index.php?topic=1364.0
That website above directly addresses your issue.

0helpful
1answer

I have a siemens WDI 1640 washer/dryer which is

I managed to find out the fault code E14 relates to faulty Heating element, product code 494069, and have been quoted £65.00 + Vat for the Bosch replacement. I am yet to decide on how I will proceed.
0helpful
2answers

Not working right

Hi

Thanks for using FixYa. E14 error code means water heating error has occurred and failed heating element.

Please do rate the solution and revert for further assistance.


Thanks
Rylee
0helpful
1answer

Kenmore elite he flashes "h" then "e"

Huuum At your service!

With an error code.
This can reset the system.
First unplug the washer and wait a 5 minutes then restart it.
It's like rebooting your computer when its acting strange!
Usually it corrects some error problems if they are not serious.
Or they are sometimes just a glitch.


Bless You
PLEASE GIVE ME A GOOD RATING HERE AT FIXYA.COM BEFORE YOU SIGN OFF.

Thank You
0helpful
1answer

Hotpoint ultima 1200 Wm72 Erroe E14

I think you will find that the error relates to the heating element.
E14 on the Hotpoint WM75E means that there is a problem with the water heating.
0helpful
1answer

Error code e14

E14 Dryer temperature probe in short circuit or interrupted
Not finding what you are looking for?

169 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...