BELTS ON WINDTUNNEL VACUUMS

Greetings from GoVacuum,

Here's an instructional video that we made showing how to change the belt on a Hoover Windtunnel upright. If your model is not a self propelled model, basically follow the same insturctions, expect instead of placing the belt over the pulley, just put the belt through the roller brush, and stretch the roller brush back into the agitator housing.
Please feel free to send me an email if you have any other questions. My email address is [email protected].

Thanks,

Chris Jones
GoVacuum.com

Take off the bottom plate, the belt and brush roll are there, If you don't see the motor shaft, then you will have to take off the top cover to get to it. But the belt goes around the motor shaft and the around the brush roll. And the belt will stretch to reach.