20 Most Recent Hoover U5753-900 WindTunnel Bagless Upright Vacuum Questions & Answers


In addition to the tab that contacts the bottom of the slider, there are 2 protusions on the adjustable wheel plate that move through holes in the housing, but only when the handle is tilted to begin vacuuming. The wheel plate has a spring that forces the tab against the slider. As the handle is moved to the upright position, the protusions move back through the holes, taking the tab away from the slider and the wheel plate locks in its highest position. Therefore, the position of the slider has no effect while the handle is upright and locked. Hope this helps.

Hoover U5753-900... | Answered on Nov 27, 2017


Take it to your local vac shop for repair. They can help you. It needs to be serviced annually anyway to perform properly.

Hoover U5753-900... | Answered on Aug 08, 2017


You need to change the belt once every year. It's a good idea to take it to your local vac shop and have it serviced once a year also. They can fix this for you. Your belt is worn out.

Hoover U5753-900... | Answered on Jul 03, 2017


try replacing the belt if you havent. it almost sounds like your getting weak aggitation. if thats not bad, check for a clog in the brushroll housing nozzle right on the inside by the tube. Replace the inside hepa filter if you havent within the last 3 months.

Hoover U5753-900... | Answered on Mar 10, 2016


gotta make sure both ends of brush bar are clean and turn freely

Hoover U5753-900... | Answered on Apr 23, 2015


Sounds like unit could be plugged some where. If the motor is over worked that will cause it to over heat hence the smell. If it keeps smelling like this you may burn the motor up. Also see if there is suction when you start it up. If not it may be plugged somewhere.
If it's not plugged could be a bad bearing. See if the belts are working ok as well

Hoover U5753-900... | Answered on Nov 21, 2014


that's normal. try lowering the heght adjustment

Hoover U5753-900... | Answered on May 27, 2014


If the hose has suction in the upright position, and the floor has no suction in the normal use position, check for obstruction in the dirt path from the agitator cavity, thru the short hose, into the lower handle.

Hoover U5753-900... | Answered on Mar 29, 2014

Not finding what you are looking for?
Hoover U5753-900 WindTunnel Bagless Upright Vacuum Logo

188 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hoover Vacuums

  • Hoover Vacuums

Most Popular Question

need replace dust cup taken old one

  • Vacuums
Loading...