Reset Hp C4385 All in one printer to new ATT 2Wire router?????

2wire lost password reset 2wire dsl modem sbc 2wire router modem unlock 2wire 2wire 1701 hg ... 2wire homeportal 2wire 2700 2wire can't get ip address .... default 2wire password 2wire modem att white paper 2wire gateway ip address .... usb 2wire hpna linux working for 2wire wrt350n and 2wire modem ...
groups.google.com/group/alt.languages.catalan/.../a1f780eac37721f2



The 2Wire HomePortal is a wired solution that offers subscribers hassle-free, ... Cisco-Linksys EtherFast Cable/DSL Router with 4-Port 10/100 Switch ... 5.0 out of 5 stars I could not ask for anything better than this., December 17, 2006 ... I waisted my money. My tech guy said it was an older generation unit, ...
www.amazon.com › Video Games › Mac Games › Hardware

Choose your Operating system > Download full featured software

HP Photosmart C4385 Downloads

Yes you can buy a different DSL modem and that should not be a problem , then once you have the new DSL you just contact ATT and they will set up the settings on it...

it means 2 things. 1st it could be the adapter because theres still power to it and 2nd is the 2wire router is already defective. if its possible for you to bring the 2wire with the adapter to any computer store or to att store and have them plug a new adapter on it . or if you have available 5volts adapter you can try to check if power will be solid green using diff adapter definitely its the adapter but if you have tried it but power will flash green or red the modem is dead. powerlight of any router should stay solid green no matter what happen.
have it checked carefully so you dont need to spend $82 for the 2wire, adapter is $10 only..

Goodluck!

del everything in %temp%, if you are using internet explorer, reset it back to factory by..in IE7 select,tools,internet options,go to advanced tab and click reset. Be advised, Vista is notoriously difficult when it comes to internet connection problems especially wireless.
www.aa1consulting.com

Here is a link to your user guide: http://www.2wire.com/pages/pdfs/5100-000326-000.Rev.A.pdf

See page 26 (page 31 of the pdf file) - it will help you find which mode your router is set in. The manual says 2701 but 2wire shows the same manual for all 2700 series.

Hope that helps :)

Don't try to scan from the printer control panel.  You need to launch the "HP Photo and Imaging Director" from your computer.  I have HP Photo & Imaging SoftwareVersion 2.0 installed which I believe was obtained from the HP site for the C4385.

The scan function works fine if you use this software.

Just disable the wireless security on your 2wire and change the channel to 11. Then power cycle all your devices including the wireless printer.

yes of course you need a wireless router for that. wireless router are for wireless network (desktop pc also needs WAN)

You need to completely uninstall printer and reinstall it. This should fix your issues.