Question about Makita 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill

1 Answer

I have 110 volt durapro 18volt dc battery charger, component R14 has burnt out beyond recognition and I was hoping someone could tell me exactly what it is so I can replace it. Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 173 Answers

Hello,
The component is a resistor. The problem is going to be determining the resistors value since it was burnt and you can not see the color code. You might try contacting the manufacturer and asking them the value of that specific resistor by including the number like you did in your post R14. If you can find a wiring diagram for the product, it should tell you the value of the resistor also.

I hope this helps you getting started in solving the issue.

If you would not mind, please rate my help. I would greatly appreciate it. Thank You

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Battery and or charger won't work. Charged a full 18 hrs. Help


Possible suspects are:
1. A severely drained battery.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Faulty main circuit breaker and or connections.
4. Faulty ignition coil and or connections.
5. Faulty spark plug, oil or gas fouled, wrong heat range or service type, wrong gap, loose in the cylinder head, broken electrode or insulator.
6. Faulty spark plug cables, leaking or broken, internal damage.
7. Faulty ignition module, switch, CKP, MAP, CMP, sensor and or any connector in the ignition circuit could have corroded, loose, or broken pins/sockets
8. Burnt exhaust valve or air leak in the exhaust system.

Nov 27, 2015 | Motorcycles

1 Answer

How do i convert a makita charger model DC18RC at 110 volt to 240 volts?


The DC18RC are most likely to charged the BL1830 battery, which is the most popular of 18V Makita power tools. It is a Li-ion battery.

And the DC18RC battery charger has two volt 110 Volt and 240 Volt.

The 240 Volt DC18RC charger can replace model DC18RA & DC18SD because of its improved performance and full compatibility with Makita's NEW 'Star' labelled batteries that communicate between the tool, battery & charger. And, it is a fast charger.

It can charge a Makita BL1830 Battery in approx 22 minutes.

But, I do not recommend to convert a makita charger model DC18RC at 110 volt to 240 volts.

The reason is as below:

1. This will void product warranty ! If you follow this mod, you do it on your own risk !

2. There are several comments that described
same model # but with different design and components.
Please beware that this mod might not work on your charger
or worst, will damage it.
Only perform this mod if you know your way around with electronics !

Sep 20, 2013 | Makita Drills

1 Answer

Hi, i have svoa labtop and now my charger adapter got burnt due to electrict short. Now my charger is not working and i cannot use it.


OK. But I don't understand what the problem is.

AC adapter (Charger) is burnt out, by a new one.

Look at the old 'charger'.
Look at the label.

Input: 100 ~ 240VAC/50 ~60HZ.

100 to 240 Volts AC, at 50 to 60 Hertz. (Cycles per Second)

Output:
This is what you need to know.
What is the output voltage of the original charger?

Example;
Output: 19VDC @ 4.63A

19 Volts DC at 4.63 Amps. (Amperes)

Your charger MUST put out 19 Volts. (For the example)
It WILL be DC electricity, so don't worry about that. (Direct Current)

[Your 'charger' is more than that. More than a charger for the laptop battery.
It is also a Converter. It converts the 100 to 240 Volts of Alternating Current, (AC), into a low DC Voltage.

Plus it charges the Battery, WHEN needed ]

Post back in a Comment as to what the exact query is.
Regards,
joecoolvette

Jan 25, 2013 | Computers & Internet

2 Answers

Put 18volt ni-cad battery in charger battery is drained but lite goes right to green


Check my previous response to this. I do hope and think it will work as it is exactly my past situations an I've solved them.

Aug 16, 2011 | Worx GT WG150 10 in. 18 Volt Cordless...

2 Answers

Can i charge a BL 1830 18volt battery from North America with a 240 volt DC 18RA makita charger


you should be able to, but it will eventually burn the battery up. but only if it slips into the charger with no force from you.

Dec 31, 2010 | Makita 2 Bl1830 18v Battery,dc18ra Charger...

1 Answer

I bougth reciprocating saw, model BJR 182Z and circle saw, BSS611Z while I was in the U.S.A.These tools use the 18 volt LXT Lithium-Ion battery BL 1830. I also bought this battery.However I am going to use...


Why can't you buy the 230 volt DC18RA charger in europe (amazon.europe country) and use it. I had the same issue yet i burned out the fuse in the 110 volt DC18RA charger because i plugged it into the wall just using an adaptor. Lesson learned. Therefore, my first solution was that i bought a converter from 220V-to 110 Volt. This showed me that my charger was done. So instead of getting another 110 volt charger sent here to Europe from Canada, I returned the converter and have on order a 230 volt input DC18RA charger from amazon.de which has the same 7.2-18V output. I have been told this will work yet the fear, and I don't know why, is that it will burn out the batteries in a year or so. It is difficult getting specific information from Makita, but I hope it all works out. Best of Luck for you

Dec 16, 2010 | Makita 2 Bl1830 18v Battery,dc18ra Charger...

1 Answer

Battery does not stay charged on my 20kw generac generator


WAS A 110 VOLT CIRCUIT RAN TO IT FROM THE NORMAL UTILITY POWER OF HOME OR BUILDING IT FEEDS?
NORMALLY THIS IS DONE IN A SEPERATE CONDUIT FOR CONTROL WIRES.AND THE FEEDERS ARE IN ANOTHER CONDUIT.
WITH A DIGITAL TEST METER,CHECK FOR 120 VOLTS AT THE BATTERY CHARGER IN THE GENERATOR CABINET.USUALLY THERE IS A RECEPTICAL TO PLUG THE CHARGER INTO.
IF VOLTAGE IS PRESENT AT THE BATTERY CHARGER AND INDICATOR LIGHTS ARE ON, CHANGE METER TO DC AND CHECK FOR 13.8 VOLTS OUTPUT FROM THE BATTERY CHARGER.IF YOU HAVE OUTPUT VOLTAGE TO THE BATTERY,AND IT IS DEAD,CHANGE THE BATTERY..

HOPE THIS HELPS YOU,BEST OF LUCK.....

Nov 01, 2010 | Generac Guardian Model 5784 20 Kw...

3 Answers

I have the Makita DC18ra s charger for 110V. by mistake i insert it to 220and burn the fuse and a components as described on the borad VDR1 01 Do someone knew what is this components thank alon


yes you can fix it i have done 2 charges but white you are in there if you chance the large round capacitor to a 450v one you then can use the charger in 220 v you will have to increase the size of the voltage resistant diode to 240v (the vrd101 part in the charger) or by pass it with a straight bridge then the charger should work in 220v because the rest of the charger is exactly the same the parts will be around $10 ibought the parts from farnell

May 16, 2010 | Makita 2 Bl1830 18v Battery,dc18ra Charger...

1 Answer

Pro tech 18volt. Item number 6810


http://www.sears.com/shc/s/p_10153_12605_00981808000P?vName=Tools&cName=PowerToolAccessories&sName=Batteries%20and%20Chargers&psid=FROOGLE01&sid=IDx20070921x00003a

Mar 27, 2010 | Dewalt 7.2-18.0 Volt One Hour Charger

3 Answers

Ihave 110 volt makita dc18rc battery charger, component VDR101 has burnt out beyond recognition and I was hoping someone could tell me exactly what it is so I can replace it. Thanks


I had the exact same problem. I ordered the ZNR V10 241U part from Dija Key. They are around 36 cents if you buy 10 of them. I cut the old one out and soldered the new one in. I changed the fuse over to an automotive one so the fuse is easier to obtain. I plugged it in and charger works fine.
What happens is a voltage spike either low or high gets recieved by the charger. The fuse appears to be slow blowing and does not stop the spike in time. The spike is stopped by the varactor surge supresser. In doing so, it saves the circuit board so all you have to replace is the fuse and the surge surprsser.

Nov 26, 2009 | Makita 2 Bl1830 18v Battery,dc18ra Charger...

Not finding what you are looking for?
Makita 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill Logo

531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Makita Drills Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

epangan29

Level 2 Expert

112 Answers

John Trevino

Level 3 Expert

1383 Answers

Are you a Makita Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...