Radio Shack calls it "Initializing," but to totally reset the scanner to factory settings,
1. Turn off the scanner, then turn it on again.
“Multi-system Trunking Scanner”
appears.
2. While “Multi-system Trunking
Scanner” appears, press 0.
3. Press 1.
4. Press ENT. “Initializing please
stand by” appears for about 5 seconds.
When the initialization is complete, M000
appears on the second line of the display.
“Bank 0 Ch 00” appears.
Note: Do not turn off the scanner until
the initialization is complete.
Need the manual for your scanner? You can download/print it here:
http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/2000164_PM_EN.pdf
BillB
366 views
Usually answered in minutes!
×