At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My Toshiba 32wlt58 wont start up. The standby light works and it appears to have power but I do not have the remote, and cannot work out how to start it up. I have tried te power button at the top but only get the green light for 2 secs, 2 clicks and then back to only the red standby light.
Re: My Toshiba 32wlt58 wont start up. The standby light...
It problem on power supply its demage may be some of components are demage such as capacitor or rectifire demage or mosfac please you go to a service center and repear it by a good technician in your area.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Looking at the user guide it appears that the amp has a standby mode.
See not below on turning standby on. Question can you see the standby light flashing.
I would also suggest using function on the amp to remove any possible issues with the remote.
One would expect the system to return to normal operation by pressing the power button again. If not what do you see on the display.
Note:
Press 1 to turn on the receiver.You can also turn on the receiver using 1 on the remote control. When you turn off the receiver, press 1 again. "STANDBY" flashes on the display panel. Do not disconnect the AC power cord (mains lead) while "STANDBY" is flashing. This may cause a malfunction.
First: Never turn the set off by disconnection of the power to the set--it can damage or cause problems.
Aside from that--if board replaced and then blows again checks have to be made to see if a short to ground exists on any line that board feeds to as voltage checks likely will not tell you what is wrong
It's trying to go back home to Kansas...jk. It's in a "Shut-down" mode to protect itself from a possible short circuit in the power supply. Need to take it to a shop - could cause a fire.
Power supply board is dead.Replaced the power supply board will solved this power problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
Generally the power button has to be on first to put the TV in standby mode. If you cant do this no remote can ever work. Remotes are not capable of turning on a set that has no power mechanically turned off. and that is what the master switch does. once that standby light is off it is not live and consuming power and not under the control of a remote anymore
This works on a couple different Toshiba models -- might work on yours...
Make sure the main power switch is OFF. Hold the "ON", "MENU", and "INPUT" buttons at the same time and turn the main power switch on. Keep them held until the yellow power standby light comes on, then let go. It is done.
×