We have a Kenmore 700 washing machine. It will

here are some ideas.....

https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Washing-Machine/45-6-151416-/New/Kenmore-Washer-Leaking-Water-110-92587210

The machine is designed with an automatic water level sensor that even in a deep setting allows at the most 5 inches of water. The reason for this has to do with government regulations regarding energy efficiency.

While you could check intake hoses, this does not change the facts.

This would seem to possibly limiit the wash load. I would refer to the manual for any insight about that. My suggestion is to place the laundry evenly distributed just below the top holes of the basket.. For me to say it had 3.5 cubic feet capacity is of little value because who measures laundry by cubic feet. I hope the suggestion is of some help.

https://www.hunker.com/13410750/troubleshooting-a-kenmore-700-washer

https://readytodiy.com/kenmore-washer-wont-fill-keeps-filling-fills-but-not-enough-0051/

I don't know if you've tried this, but when my washing machine misbehaves or the buttons wig out or it stops working, I just unplug from 110 for a few minutes and plug it back in. This has always worked for me.

Check with www.searspartsdirect.com

Faulty or something in water drain pump.

Cold water supply valve on? Otherwise, you may have a problem with the washer electric solenoid fill valve.

this is mainly because of having some problem in water drainage system. so make your drainage syatem proper

First ck to see if your water pump is leaking. It normally leaks when the machine is running not just filling. Also look at all the attaching rubber hoses under the machine and see if water is leaking down the back right side of the machine and then running around the frame to the front long shot but possible.

Hi there,

Yes its true that this washer not worth repair.... Better you can go for a new washer..
I have a question - is there any error code on the display control?
thanks

The first thing seems to be the timer,or the water level switch. Try filling the washer with water by hand, if it starts to agitate after being filled its the timer, if not it is the water level switch, let me know if you need further assistance.