Hi I have a Agfa Sherpa2 that gives red light error

The toner cartridge is not installed, or the printer detects a toner cartridge error. The error is caused by a defective cartridge, an unsupported cartridge an invalid refill, or a cartridge meant to be used in another geographic region.

If the toner cartridge is not installed, install it. If the toner cartridge is installed, remove it and install a new toner cartridge.

For Cartridge errors, Press and release the right button twice briefly to display secondary error codes.

For further assistance, please contact Lexmark Technical Support.

Please get the driver at : www.agfa.com/digicam_scanner_drivers/
www.driverslab.com/drivers/Camera/Agfa/16/10.html

Jay

the encoding strip has probably got dust on it - blow it off with a can of compressed air

pls,can anybody help me i need AgfaJet Sherpa2 desingn jet printer.

hi i,m iskandar how cant solve the trouble for flashing led resume hp deskjet f2180 thanks
i wait yor reply solution




regrads
ISKANDAR
[email protected]

10.00 error is for the black cartridge. Check the cartridge locker for the black toner cartridge on the right side, is it different from the other? does it moves correctly? check properly. If the locker seems correct, try clean the contacts on toner and opposite HV pins in printer

OFF the printer.open the top cover whole scanner unit .then look at the black base where usually cartridge moves when the printer is ON when you give printouts..press that black base and it will move little bit down .that whole black base comes little bit up due to some reason and when the cartridge holder moves from left to right for its internal allignments/adjustments it clashes that part somewhere and make such noices.and gives the service error..just press that whole 7- 8 inches base where the cartridge moves slowly ,carefully and firmly.then ON the printer and check.do it again if it does not becomes ok after first time.

rate the solution if it helps
thanks.

Calibrating monitor may help. Are you sure that what you see on the monitor is e.g grey (only K?) or is it mixed. If you print 100m100y is this tomato red? Are you working in RGB or in CMYK?

Hi,

I just like to ask to where specifically you can see the red light. It will help us determine what cause the red light. To give you heads up as well, the Printer's LCD screen can help us determine what exactly the offline condition of the CX3200 is:


Error message: No color or black ink cartridge-->Press the Color Copy button to install a new ink cartridge.
Solution: The indicated ink cartridge is not installed. Please install the necessary cartridge(s).

Error message: Color or black ink out -- >Press the Color Copy button to begin replacing the ink cartridge.
Solution: The indicated ink cartridge is out of ink. You will need to replace the necessary ink cartridge(s).


Error Message: Ink cartridge error -- > Press the Color Copy button to begin replacing the ink cartridge.
Solution: There is something wrong with the ink cartridge. Make sure the cartridge is genuine Epson ink. Also, try reseating the cartridge (remove it, and then reinstall it).

Error Message: Paper jam or misfeed -- > Press the Color Copy button and clear the paper jam by hand if necessary.
Solution: Paper is jammed. Check for any obstructions under the unit's cover, and in the paper tray.

Error Message: Paper out -- > Load paper in the sheet feeder and press the Color Copy button.
Solution: Load paper in the sheet feeder, and then press the Color Copy button to continue printing.

Error Message: Scanner unit open -- > close the scanner unit
Solution: Carefully close the scanner and press it down until it clicks securely into place.

Error Message: Scanner error -- > See your documentation and call service if necessary.
Solution: Press the ON button to turn off the Epson Stylus CX3200. Unlock the transportation lock, if necessary. If it is already unlocked, toggle the lock back and forth, 5-10 times. Turn on your Stylus CX3200 again.


Error Message: Printer error -- > See your documentation and call service if necessary.
Solution: Press the ON button to turn off the Epson Stylus CX3200. Disconnect it from power, and then reconnect it to power. Press the ON button to turn on the Stylus CX3200.

It sounds like its either the wrong cartridge or the actual crum chip on the cartridge is faulty