Why does my hitachi rear projection tv has double image?

your convergence circuits have failed

tv looks in the center and have double and multiples colors . majic focous do not fix t

Replace convergence ics. Hitachi has a ki for this consisting of STK-395-110 ic and some resistors.

Your convergence chips are bad. You can set a repair kit from www.TvRepairKits.com for your model. Their kits come with all the parts and a complete photo instruction guide.

Replace Both of your convergence ICs they are big black ICs and ck resistors RK4246,50,54,58,62 i have the values if you need them they are 1.5ohms up to 3.9ohms.ICs will have STK392-110s if this is the number on yours upgrade to 180s

Does the magic focus work on your set ?

If it doesn't you must replace the convergence Ic's with a kit that is available through your local parts distributor

You must replace all resistors in the kit
If you are not good at soldering and de- soldering have a local tv shop do it for you

Good luck

Problem seems in convergence out section.

TV needs Convergence Out ICs replacement.

If you have TV repair experience and know good soldering work then you can give it try OR get help of qualified TV tech to fix it.

If you need further help, let me know.

1st step, replace battery of remote, no result, 2nd step, check / replace Remote Sensor of TV.

your tv is having a convergence problem, nothing you can do aloneyou wll need to call a tech, there must be 2 bad ic and some resistor burnt

Your tv is crt-based and is out of convergence. In other words, the settings for keeping the Red, Green and Blue images aligned have drifted and must be reset. This is common with CRT projectors and CRT rear projection tvs.

Refer to your owners manual for instructions on re-aligning it.