Factrory reset code for canon fax sensys L150

I sensy fax- L170 on screen appear turn the main power on E736-0000 only

First things first. Try and print report from the fax. Any kind of report. If it is printing OK, then the next step is to check if:

Your clients receive your faxes OK? If they are dark as well, then your scanner head is at fault.

When you make Copy on your fax and it prints dark it could be simply set with dark settings _or_because of the white calibration strip or roller being soiled or dirty, which acts as the ultimate white reference point for scanner _or_ the Scanner CCD sensor is in paper jam release position (too far away from reading the originals) just pull it back to normal feed position.

Or simply faulty scanner.

Hi. That error indicates there is a problem in the scanning unit. Get technical support

Go into the menu. In the FAX Settings the RX Mode Settings section and turn on the FAX ONLY setting.
If all is well then it will receive. If it does not then check that you are using the genuine Line lead that can with the machine.

Canon SENSYS FAX L150

Try unplugging it for a few moments they plugging it back in.

Code

E225-0001

Description

Light intensity of a lamp is less or equal to the criteria

Remedy

When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
(1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor.
(2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor.
(3) Replace the Contact Sensor. (4) Replace the Main Controller Board.

HI
how to reset factory canon L150

How to resolve the code 225 in Canon Fax 150?

hi

I need to CODE reset factory default printer

model : CANON L150