I need a sharp antenna model cd-c2610. serial number60447849

It depends on the plug of the antenna on the system, if it is a female RF plug, you can use a normal bunny ears antenna with a female to female adapter.

Good luck!

Try these web sites:

http://search.aol.com/aol/search?&s_qt=sb&q=Sharp+mini+cd-dk890n+parts&tb_oid=07-01-2013&s_it=amonetizetest1-ie&tb_mrud=07-01-2013&tb_uuid=20130107163427450

http://www.partstore.com/Model/Sharp/Sharp/CDDK890N.aspx

Have you tried ebay etc? or the manufacturer of the unit? I find ebay very helpfull and cheap!!! Hope this helps,

The link below shows the original which is no longer available and a replacement part.

http://www.partstore.com/Model/Sharp/Sharp/CDC1900.aspx?p=1&z=50&c=09617d8b0d2520400189e2503112cec1&bs=Category&bd=Asc&ms=Category&md=Asc&k=&on=&cfilt=


Please leave feedback rating.

Cheers

Andy

quick-start guide:
http://files.sharpusa.com/Downloads/ForHome/HomeEntertainment/
Audio/QuickGuide/Archive/aud_qguide_cddd4500.pdf

operation manual:
http://files.sharpusa.com/Downloads/ForHome/HomeEntertainment/
Audio/Manuals/Archive/aud_man_cddd4500.pdf

try radio shack or best buy

if you have an old rabbit ear antenna from your old TV that will work

Looking at Sharp's site, you have a 3 pin plug that goes into the rear of the unit. the top pin is FM the middle and bottom are AM. You can get female "bullet" connectors and make your own if you wish. Or you can order it from Sharp. Probably under 20. Hope this helps

yes you can put in the serial # of the printer and there site will tell u what u have to do

The protect message indicates that the output amplifier section has a problem and the unit has shutdown to prevent further damage. This usually is caused by shorted transistors in the final output stage. In your case, the output amplifier is a single replaceable amp-pac (STK402-090S). This can be purchased from tritronicsinc.com using the Sharp part number: VHISTK4029S-1 at a cost of $63.32

Dan