Where can I get a replacement lens cap & what size would fit.

The burners will only fit into the base that is the same size.
https://www.partselect.com/Models/JDR8895AAS/Sections/CONTROL-PANEL-TOP-ASSEMBLY/?ModelID=110583&ModelNum=JDR8895AAS&mfgModelNum=&ManufactureID=1&Selected=56477&Position=2&mfg=Maytag&Type=Range&Mark=2

https://www.plessers.com/Jenn-air/jdr8895aas.htm

..

Lens caps come in different sizes to fit different size lenses. Obviously, a big lens requires a larger cap than a small lens.

Two of the better online sources for just about everything photographic are http://www.adorama.com and http://www.bhphotovideo.com

You can try doing a Google search for your camera make model. I did and found this - below.
btw - Canon is spelled with one "n" which might help in your search results. I'd go to canon usa and click on their link or search their store for your replacement lens cap. Different lenses have different sized lens caps, so be sure you have the right one.
Lens Caps ' Canon Online Store shop.usa.canon.com/shop/en/catalog/.../ef-lens-accessories/lens-caps
Canon Tips & Tricks When using a lens with IS while on a tripod, ... Canon Tips & Tricks That hole in your battery cover has a purpose! ... Lens Cap 14mm f/2.8L II.

Has the Lumix got a thread on the front of the lens where the lens cap fits. if so see if there is a size written inside the lens cap. This will tell you what size threaded adaptor will be required on the front of the lens to fit the ring light to. be warned as this may cut the corners off your photos then the lens is in wide focus mode. Some lenses may not allow adaptor to be fitted to them as the lens element moves in and out and may hit the ring light and cause damage to your camers. Study the camera first.

I don't know which wideangle lens you have, but there most likely is a number giving the the size of the thread in front of the lens. If there isn't, you can measure it with a ruler marked in millimeters. Either way, simply order a lens cap of that size online or buy it at a good camera store. If you can't find the size, simply take the lens with you to a camera store and find a lens cap that fits. You don't need to find a specific brand, about the only thing that matters is the size. Unless, that is, you care a whole lot about the styling...

Either remove the step-up ring, or get a lens cap to fit the new size.

let me just say that fuji sells the products but doesn't stock replacement parts.. i contacted fuji and they set me an email to call the 800 number. called and they refered me to another 800 number and then they in turn refered me back to the original 800 number. so if anyone is looking for a lens cap don't waste you're time.. they don't carry them..

The VX2000 lens does have a 58mm diameter thread for filters etc. The 72mm refers to the focal range (Zoom) from 6mm to 72mm. The 58mmm lens hood should fit, but I strongly suggest you obtain a SONY OEM lens hood with lens cap. Goto http://www.pro-cam-electronics.com or other professional camcorder sites for these items.

Peter Jansen

I would sugest using an adaptor ring. You can reduce the size of your lens opening down a common size lens cap that will fit your camera. If you can't go this route then give me the make and model number and I will see what I can do for you. LJ

Get a CLA-1 lens tube. It screws into the camera body. The other end accepts 43mm accessories. Put on a 43-49mm step-up ring. Into that screw a 49mm UV filter. (The step-up ring is needed to separate the filter from the extended lens.) Leave the UV filter on at all times. Throw away the lens cap.